 cylinder head temp sensor, cylinder head temp sensor |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 2Lyelo914 |
 Sep 1 2010, 03:27 PM
Post
#1
|
|
Newbie  Group: Members Posts: 18 Joined: 22-July 04 From: Naperville, IL Member No.: 2,384  |
Any procedure on putting this in a '74, 914 2.0L?
Thanks. Jim |
   |
 
|
  |
Replies
| avidfanjpl |
Sep 1 2010, 06:12 PM
Post
#2
|
|
914 Hemophiliac Group: Members Posts: 720 Joined: 6-April 10 From: Bear, Delaware Member No.: 11,566 Region Association: MidAtlantic Region |
A lot of us took a long 13mm socket and dremeled out a channel so the wire can avoid getting squashed.
I have removed and installed 3 lately, so I removed the injector connectors from the injectors, took off the injector pipes completely, then had all the room I needed to remove the rubber grommet and install the CHTS with nothing in the way. I then put the stuff back, and it took 10 minutes. Even in 100 degree heat. I also removed the deceleration valve and the MPS first. Makes for easy access. John |
|
|
|
Posts in this topic
2Lyelo914 cylinder head temp sensor Sep 1 2010, 03:27 PM
underthetire Soak the old one in PB blaster for days before you... Sep 1 2010, 03:43 PM Gint Moving to the garage... Sep 1 2010, 08:20 PM Jeffs9146
I ground a notch in an extension to fit the wire... Sep 1 2010, 08:32 PM
malaga_red75
I ground a notch in an extension to fit the wir... Sep 2 2010, 02:02 PM McMark Are we talking fuel inject CHT? Or aftermarket da... Sep 2 2010, 01:12 PM majkos
Are we talking fuel inject CHT? Or aftermarket d... Sep 2 2010, 03:16 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 15th June 2026 - 03:30 AM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.