 My Rotary to suby swap! The saga begins page 6, Test fitting the suby- Intake flip issues? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| JRust |
 Oct 25 2010, 11:33 PM
Post
#1
|
|
914 Guru  Group: Members Posts: 6,317 Joined: 10-January 03 From: Albany Oregon Member No.: 129 Region Association: Pacific Northwest 
 |
Okay so this is my latest find. This is a 74 with a 13b Rotary motor that was built by Racing Beat in CA. Looks like they were in Anneheim. Not sure if they are still around. Guy bought it in similar condition to selling it. When he bought it the motor had overheated. He took it to Racing beat & had it completely rebuilt. Said it was pushing 220hp but only got 5mpg. I know rotary's came in rx-7's for the most part. Thats about the extent of my knowledge of the rotary. The guy has had this sitting in his garage since 99 when it overheated on him. He said it won't run but will turn over. I'll get more detailed pics of the fron radiator setup with oil cooler. Take a look at the motor pics. Defintely looks to have been a pretty hot motor. Kind of figuring to go Suby with the TDI conversion as a possibility.
Anyone looking for a project I have like 3 cars I will be getting rid of (IMG:style_emoticons/default/biggrin.gif) . Anyway take alook at the pics & let me know what you think. Paint code is l64k which is a forest green. Obviously it was repainted some shade of red/orange Attached image(s)       
|
   |
 
|
  |
Replies
| Rand |
Oct 27 2010, 09:22 PM
Post
#2
|
|
Cross Member Group: Members Posts: 7,413 Joined: 8-February 05 From: OR Member No.: 3,573 Region Association: None |
I have a friend in Corvallis who is a rotary guru and seasoned autocrosser. Let me know if you want a connection to explore.
|
|
|
|
| srb7f |
Oct 27 2010, 09:40 PM
Post
#3
|
|
Member Group: Members Posts: 157 Joined: 17-May 04 From: Roswell, GA Member No.: 2,077 Region Association: None |
Not sure how close these guys would be to you, but it may be worth a call. They're somewhere in WA and appear to be highly thought of on the RX-8 discussion board.
I have ordered basic rotary tune-up stuff only so far, but from the looks of their website they have just about anything you would need. http://www.atkinsrotary.com/ |
|
|
|
Posts in this topic
JRust My Rotary to suby swap! The saga begins page 6 Oct 25 2010, 11:33 PM
brant how much rust...
I need to get a new project with ... Oct 25 2010, 11:36 PM PanelBilly Did you ever think of finishing one of them before... Oct 25 2010, 11:43 PM PanelBilly Edited as the two threads we merged Oct 25 2010, 11:52 PM
JRust
see my comment on the post you want to delete
I ... Oct 25 2010, 11:55 PM Mikey914 Sounds kind of interesting. Any idea as to what... Oct 26 2010, 02:07 AM Bleyseng Racing Beat is still around but a 13B ported to 22... Oct 26 2010, 04:16 AM Gint Merged your threads since both threads had posts i... Oct 26 2010, 04:55 AM Rotary'14 I don't see any PICTURES!! :D
:tti... Oct 26 2010, 06:13 AM JRust Okay got the pics added again. Just a mixup with m... Oct 26 2010, 08:06 AM RJMII Jamie needs this shirt. :) :poke:
http://www.914... Oct 26 2010, 08:08 AM JRust
Jamie needs this shirt. :) :poke:
http://www.91... Oct 26 2010, 08:16 AM oldschool
[quote name='RJMII' post='1387003' date='Oct 26 2... Oct 26 2010, 02:24 PM johannes :lol4: Jan 7 2011, 08:33 AM kg6dxn I'm thinking of doing a rotary conversion. Tho... Oct 26 2010, 08:48 AM PanelBilly I want one of those shirts Oct 26 2010, 08:50 AM markb
I want one of those shirts
:agree: :rotfl: Oct 26 2010, 09:40 AM 6freak Mazda also put rotary`s in some of there truc... Oct 26 2010, 12:21 PM JRust I'm a little surprised to see dual MSD boxes i... Oct 26 2010, 01:21 PM Rotary'14
I'm a little surprised to see dual MSD boxes ... Oct 26 2010, 01:29 PM JRust
Mazda ignition system has 2 coils,, Leading and T... Oct 26 2010, 01:58 PM montoya 73 2.0 You are the man Jamie! I have a friend here in... Oct 26 2010, 01:26 PM oldschool
Okay so this is my latest find. This is a 74 with... Oct 26 2010, 02:25 PM Rand When I saw the pic of the radiator setup they used... Oct 26 2010, 03:19 PM JRust I need to take pics of the radiator setup. There i... Oct 26 2010, 03:39 PM kg6dxn
I need to take pics of the radiator setup. There ... Oct 26 2010, 04:39 PM Rand
I need to take pics of the radiator setup. There ... Oct 26 2010, 04:48 PM JRust
I need to take pics of the radiator setup. There... Oct 26 2010, 06:01 PM kg6dxn Jaimie, show us pics of the radiator setup/ Now I... Oct 26 2010, 04:35 PM jsaum Atkins Rotary here in Puyallup builds race engines... Oct 26 2010, 04:44 PM speed metal army A fellah who builds crazy rotary stuff up here use... Oct 26 2010, 06:18 PM srb7f My DD is a RX-8, so I know enough about the rotary... Oct 26 2010, 06:28 PM computers4kids OK Jamie...you know what I'm thinking...I... Oct 26 2010, 06:35 PM JRust Radiator pics! Pulls in the front bottom chann... Oct 26 2010, 08:19 PM oldschool What are the 2 black things near the air dam? Oct 26 2010, 08:52 PM JRust
What are the 2 black things near the air dam?
Do... Oct 26 2010, 10:12 PM oldschool
What are the 2 black things near the air dam?
D... Oct 26 2010, 10:38 PM JRust
no in photo 1 next to the tits :blink:
Ah sorry... Oct 26 2010, 10:48 PM oldschool
no in photo 1 next to the tits :blink:
Ah sorr... Oct 26 2010, 10:56 PM JRust Yes my last name is Rust. Ironic I know :blink:
... Oct 26 2010, 11:14 PM JRust Pics of the muffler. Not great as the car isn... Oct 26 2010, 11:57 PM kg6dxn Is that a heater core bolted to the engine bar? Oct 27 2010, 10:39 AM oldschool
Is that a heater core bolted to the engine bar?
... Oct 27 2010, 11:02 AM Rotary'14
Is that a heater core bolted to the engine bar?
... Oct 27 2010, 11:37 AM JRust
Is that a heater core bolted to the engine bar?
... Oct 28 2010, 08:22 AM BIGKAT_83 Somebody did a nice conversion on that. All of the... Oct 27 2010, 10:48 AM oldschool
Somebody did a nice conversion on that. All of th... Oct 27 2010, 11:02 AM Todd Enlund Fixed it.
Oct 27 2010, 02:53 PM PanelBilly Have you checked the vin to see if its an LE? Oct 27 2010, 03:02 PM Tom_T Jaime, you've got this 914 disease BAAAAD bud... Oct 27 2010, 03:10 PM oldschool
Jaime, you've got this 914 disease BAAAAD bud... Oct 27 2010, 03:23 PM Root_Werks Man, someone should snag this, drop a decent used ... Oct 27 2010, 03:25 PM JRust Yeah I am leaning more towards just keeping it rot... Oct 27 2010, 03:37 PM srb7f Sure looks to be a nice conversion overall. Why n... Oct 27 2010, 06:38 PM JRust I actually allready have a good radiator setup for... Oct 27 2010, 06:54 PM kg6dxn
I actually allready have a good radiator setup fo... Oct 27 2010, 07:06 PM JRust
Spend $1600 on a JDM turbo rotary 13B and dr... Oct 27 2010, 07:36 PM kg6dxn I found that pic on DDK. there is a guy on SF bay ... Oct 27 2010, 09:07 PM oldschool I would like to see how many Rotary 914 dudes get ... Oct 27 2010, 09:20 PM kg6dxn
I would like to see how many Rotary 914 dudes get... Oct 27 2010, 09:38 PM JRust
I have a friend in Corvallis who is a rotary guru... Oct 27 2010, 10:24 PM Rand
I have a friend in Corvallis who is a rotary gur... Oct 28 2010, 11:12 AM jsaum www.atkinsrotary.com Oct 27 2010, 10:38 PM RJMII
yeah, Jamie definitely enjoys talking! Oct 28 2010, 01:02 PM kg6dxn Atkins is expensive! I know they do good work ... Oct 28 2010, 11:17 PM JRust Jaime (old school) has a guy down there who will d... Oct 29 2010, 07:55 AM JRust I just bought a used 13b from a 88 rx-7 off ebay. ... Oct 29 2010, 05:06 PM Rotary'14
I just bought a used 13b from a 88 rx-7 off ebay.... Oct 29 2010, 11:18 PM JRust
Jaime, I want your rotary experience to be a good... Oct 29 2010, 11:39 PM Lennies914 Jamie, there's a guy down here that has a 13b ... Oct 29 2010, 05:28 PM JRust
Jamie, there's a guy down here that has a 13b... Oct 29 2010, 05:36 PM Rotary'14 If you want to use your 88 motor in your car,,,
Yo... Oct 30 2010, 09:33 AM JRust Now I am really lost. I thought the 13b was 2nd ge... Oct 30 2010, 09:44 AM Rotary'14
Now I am really lost. I thought the 13b was 2nd g... Oct 30 2010, 10:09 AM charliew Ahhhh a new learning curve experience. I was told ... Oct 30 2010, 10:07 AM Rotary'14
Ahhhh a new learning curve experience. I was told... Oct 30 2010, 10:13 AM charliew I always like the rpms of the rotarys but remember... Oct 30 2010, 10:20 AM kg6dxn
I always like the rpms of the rotarys but remembe... Oct 30 2010, 11:07 AM Rotary'14
I always like the rpms of the rotarys but remembe... Oct 30 2010, 11:14 AM roadster fan Hey Jamie,
Looks like a cool project! I thin... Oct 30 2010, 11:53 AM JRust No plans to sell it but thanks to those interested... Nov 1 2010, 05:25 PM oldschool
No plans to sell it but thanks to those intereste... Nov 1 2010, 05:49 PM kg6dxn I have a haynes manual. I would not use only this ... Nov 1 2010, 06:33 PM Rotary'14 There's a whole series of rebuild videos on Yo... Nov 1 2010, 06:53 PM JRust
There's a whole series of rebuild videos on Y... Nov 1 2010, 09:25 PM Bleyseng set the motor up like this. Late model 13b with a ... Nov 2 2010, 02:24 PM JRust As tempting as it is to go crazy & get a real ... Nov 2 2010, 08:05 PM Rotary'14
As tempting as it is to go crazy & get a real... Nov 2 2010, 08:08 PM JRust I put this up temporarily in the classifieds for s... Nov 18 2010, 01:12 PM realred914 that there is purty sweet!!!! :che... Nov 20 2010, 11:42 AM Sleepin I am just waiting on this shirt! Nov 20 2010, 01:37 PM RJMII
I am just waiting on this shirt!
I'm s... Nov 20 2010, 02:55 PM eastbay851 for what it is worth.... i am running a ported 13... Jan 6 2011, 08:31 PM kg6dxn
for what it is worth.... i am running a ported 1... Jan 6 2011, 10:16 PM oldschool
for what it is worth.... i am running a ported 1... Jan 7 2011, 01:08 AM rdauenhauer
I am just waiting on this shirt!
I need one... Jan 7 2011, 02:53 AM AMG Just a heads up, one of the bigger problems we see... Jan 7 2011, 11:15 AM Eric_Shea AMG... I have a question.
I have a friend who... Jan 7 2011, 07:52 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 6th July 2025 - 10:53 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.