 Installed 911 Aluminum Auxiliary Support (Front Cross Member), Now Protective Plate Doesn't Fit. Solutions? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| mwyatt |
 Dec 14 2010, 01:33 AM
Post
#1
|
|
Member  Group: Members Posts: 84 Joined: 5-April 03 From: San Diego, CA Member No.: 516 Region Association: Southern California  |
Hi guys. I installed an Aluminum Auxiliary Support in my 914 this weekend. It bolts right up, but it comes down lower than the steel piece and now the stock 914 underfloor protective plate doesn't fit. There are also no holes in the support for the plate to screw into in the front, but the two bolts in the rear are fine (see attached pic from the front).
I know I can't be the only one that has done this. What have others done to make the protective plate work? By the way, for those that have been thinking about doing this, I probably wouldn't recommend it. I'd guess it's only 3 or 4 pounds lighter than the steel piece, and some have suggested that it can flex. But I'm committed at this point to trying to make it work. - Mike  |
   |
 
|
  |
Replies
| pete000 |
Dec 14 2010, 01:09 PM
Post
#2
|
|
Senior Member Group: Members Posts: 1,887 Joined: 23-August 10 From: Bradenton Florida Member No.: 12,094 Region Association: South East States |
4 lbs is 4 lbs !
I have to diet for a month and go to the gym twice a day to loose 4 lbs ! Was the job easy, I want to do this on my 914 soon. |
|
|
|
| mwyatt |
Dec 14 2010, 03:58 PM
Post
#3
|
|
Member Group: Members Posts: 84 Joined: 5-April 03 From: San Diego, CA Member No.: 516 Region Association: Southern California |
QUOTE(pete000 @ Dec 14 2010, 03:09 PM)  4 lbs is 4 lbs ! I have to diet for a month and go to the gym twice a day to loose 4 lbs ! Was the job easy, I want to do this on my 914 soon. Pete, the job is fairly easy. Make sure you measure your front ride height on each side of the car before you take everything apart, because you'll have to reset it. Cap'n, I'll see if I can pick up a Carrera protective plate and let everyone know if it works. |
|
|
|
Posts in this topic
mwyatt Installed 911 Aluminum Auxiliary Support (Front Cross Member) Dec 14 2010, 01:33 AM
r_towle drill two small screw holes in the flange of the s... Dec 14 2010, 10:08 AM
mwyatt Thanks Rich, makes sense. And I suppose I could a... Dec 14 2010, 11:59 AM Cap'n Krusty Have you looked into fitting the 911 plate?
The C... Dec 14 2010, 12:02 PM mwyatt
Have you looked into fitting the 911 plate?
The ... Dec 14 2010, 12:16 PM Cap'n Krusty
Have you looked into fitting the 911 plate?
The... Dec 14 2010, 01:35 PM mwyatt I picked up a protective plate from a '77 911 ... Jan 10 2011, 11:43 PM Cap'n Krusty
I picked up a protective plate from a '77 911... Jan 11 2011, 09:47 AM jt914-6 :ttiwwp: Jan 11 2011, 05:22 AM URY914 This really isn't worth the effort. Removing 4... Jan 11 2011, 07:50 AM Chris Hamilton
This really isn't worth the effort. Removing ... Jan 11 2011, 10:35 PM Richard Casto
This really isn't worth the effort. Removing... Jan 12 2011, 10:03 AM Britain Smith You know that the aluminum crossbar flexes...ask S... Jan 11 2011, 09:20 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 10:14 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.