 Camber set up for six, Need some help |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| sixaddict |
 Jan 23 2011, 10:18 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 804 Joined: 22-January 09 From: Panama City Beach, FL Member No.: 9,961 Region Association: South East States 
 |
Doing some "work" to get more negative camber up front ...but now trying to decide entirre set up....Been so long since had this done I am forgetting.
RA1, 16 X 225 50 w/ 7.5" wheels front Ditto 16 x 225 45 w/ 8.5 rear Shooting for 2 1/2 negative up front What should I do @ the rear. Mainly DE/track but some autocrossing. Prefer to compromise ax set-up as opposed to track. 2.7 at this time if it matters. Thank for the help Terry |
   |
 
|
  |
Replies
| brilliantrot |
Jan 27 2011, 11:22 PM
Post
#2
|
|
Member Group: Members Posts: 125 Joined: 27-April 07 From: Costa Mesa Ca. Member No.: 7,699 |
Nothing special just de-cambered ball joints, undercoating removal and a little tweaking to get the top hat all the way over with no dust shield and a low ride height. Quite possible that both my spindles were bent though. The decambered ball joints are good for ~0.75 so it really wasn't that much more than most.
|
|
|
|
Posts in this topic
sixaddict Camber set up for six Jan 23 2011, 10:18 AM
J P Stein There is really no simple answer to the question. ... Jan 23 2011, 11:17 AM PeeGreen 914 With my RA1s I had a little over -2 in the rear an... Jan 23 2011, 11:59 AM sean_v8_914 neg camber in that range will make RA1 work well u... Jan 23 2011, 12:01 PM brilliantrot Negative camber settings are a function of driver ... Jan 23 2011, 02:42 PM
J P Stein
Negative camber settings are a function of driver... Jan 23 2011, 06:14 PM brant
Negative camber settings are a function of drive... Jan 23 2011, 06:37 PM brilliantrot
Negative camber settings are a function of drive... Jan 23 2011, 08:14 PM sixaddict Good stuff...Hate to say it but I heard exactly wh... Jan 23 2011, 07:45 PM sean_v8_914 how did you get neg 4 in teh front of a 914? Jan 27 2011, 12:29 AM sean_v8_914 I know they make them but I have never seen one. i... Jan 28 2011, 01:59 AM brilliantrot Yes. The actual ball portion of the joint is much ... Jan 28 2011, 01:37 PM campbellcj Interesting thread - I should be able to add my da... Jan 29 2011, 02:32 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 29th May 2024 - 05:20 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.