 six conversion engine mounts, which is best |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| bhfast |
 Jan 13 2003, 04:32 PM
Post
#1
|
|
live it loud, balls out  Group: Members Posts: 83 Joined: 30-December 02 From: Chandler, AZ/Daytona Beach, FL Member No.: 48 Region Association: Southwest Region  |
I have seen several different types of six conv. engine mounts. patrick has 2, the bulk head one that pelican sells, and rich johnson's( i beleive is similar to pelican's) which have you guys used? all input is appreciated.
BH |
   |
 
|
  |
Replies
| Brad Roberts |
Jan 13 2003, 08:11 PM
Post
#2
|
|
914 Freak! Group: Members Posts: 19,148 Joined: 23-December 02 Member No.: 8 Region Association: None |
It is designed to be both. I personally bolt them in and then weld them. I'm pretty sure JP did this also on his conversion. The problem with leaving it bolted in: The lower firewall that this would bolt too..is double walled with about an inch gap. You either have to make spacers for it too pinch both walls or you need to drill large enough holes that you can tighten everything against the engine firewall. I personally just used the bolts to hold it in place when I welded mine.
Go here: http://www.all914.com and click on the projects page and look at Brads six conversion. B |
|
|
|
Posts in this topic
bhfast six conversion engine mounts Jan 13 2003, 04:32 PM
Jeroen Hey BH,
The "other" 6-mount would be the one in t... Jan 13 2003, 06:43 PM Jeroen Errr.... forgot the pic :blink:
well, here is t... Jan 13 2003, 06:45 PM Brad Roberts That is actually the Patrick mount.
RJ all the wa... Jan 13 2003, 07:37 PM Brad Roberts Here is the complete setup as RJ sells it.. Jan 13 2003, 07:41 PM bhfast brad,
is that a bolt in or weld in kit?
Brian Jan 13 2003, 07:44 PM bhfast i'm definetly inter ested in buying that kit, ... Jan 13 2003, 08:45 PM Gint Brasshole,
Still haven't fixed that full page... Jan 13 2003, 09:04 PM J P Stein Got a pic here somewhere.
Mine is the Velious moun... Jan 14 2003, 04:01 AM Brad Roberts Brian,
A friend of mine has a complete RJ mount w... Jan 17 2003, 02:27 PM
bhfast Brad,
that sounds good to me.
Brian Jan 17 2003, 02:33 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd April 2026 - 03:17 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.