Who has bought the inner rocker from AA, I meant to ask about the rocker |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Who has bought the inner rocker from AA, I meant to ask about the rocker |
obscurity |
Jun 30 2011, 06:33 PM
Post
#1
|
Member Group: Members Posts: 411 Joined: 24-February 06 From: Atlanta ,GA Member No.: 5,628 Region Association: South East States |
I am curious whether it comes with a zinc coating, just red shop primer, or raw steel
John |
nsr-jamie |
Jul 1 2011, 08:33 AM
Post
#2
|
914 guy in Japan Group: Members Posts: 1,182 Joined: 7-November 07 From: Nagoya, Japan Member No.: 8,305 Region Association: None |
Are the inner longitudinal parts that go in the inside of the car? Are they welded to the floor pan? I have seen some people call them inner or outer and am not quite sure....next year I am going to do some rust repair on my car, my outer longitudinals are not too bad but need work but the inner longitudinal on the passenger side is quite bad and I cant seem to find a good replacement...I am talking about the parts that are inside the car that are carpeted and not the outside parts covered by the rocker panels
|
obscurity |
Jul 1 2011, 08:51 AM
Post
#3
|
Member Group: Members Posts: 411 Joined: 24-February 06 From: Atlanta ,GA Member No.: 5,628 Region Association: South East States |
Are the inner longitudinal parts that go in the inside of the car? Are they welded to the floor pan? I have seen some people call them inner or outer and am not quite sure....next year I am going to do some rust repair on my car, my outer longitudinals are not too bad but need work but the inner longitudinal on the passenger side is quite bad and I cant seem to find a good replacement...I am talking about the parts that are inside the car that are carpeted and not the outside parts covered by the rocker panels It appears I have made the same mistake. I meant to ask about the outter longitudinal/inner rocker (I have heard both) The inner longitudinal are welded to the floorpans. It is a relativelt expensive part considering it is a basic box. I bought it because it is hard to bend 16ga steel and it came with the screew hole for the passenger seatbelt. John |
Lo-Fi Version | Time is now: 15th June 2024 - 09:41 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |