![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
TheCabinetmaker |
![]()
Post
#1
|
I drive my car everyday ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,304 Joined: 8-May 03 From: Tulsa, Ok. Member No.: 666 ![]() |
I'm going to my novice DE at Hallett raceway in two weeks, and need to replace my dot 3 with dot 4. I did a search but nothing came up. Everything else on the car is up to specs. Whats the best method to do this? Is it just bleeding the brakes till all the fluid is changed? Do I drain the entire system, then refill and bleed, bleed, bleed?
Thanks in advance, Curt |
![]() ![]() |
tat2dphreak |
![]()
Post
#2
|
stoya, stoya, stoya ![]() ![]() ![]() ![]() ![]() Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region ![]() ![]() |
QUOTE(Curvie Roadlover @ Apr 20 2004, 06:36 PM) I attended a 4 hour brake seminar a couple of weeks ago and learned a ton. Of particular interest were 2 things: 1. 17mm MC puts out more braking pressure than the 19 mm MC, and 2. Don't use a power bleeder, ie. one that pressurizes the resevoir. 1. Reason is the same reason a spike heel will sink deeper into the lawn than a flat heel. Less surface area with the same amount of pressure from your foot will deliver more PSI to the MC. This revelation came as kind of a surprize considering everyone always wants to "upgrade" to a 19 mm MC but what he says makes sense when you think about it. (By the way, he was the brake expert Grassroots Motorsports consulted for its' 914 racecar project. They had already installed a 19 mm MC on the car before consulting him. He made them put the 17 mm one back on) 2. Reason is that pressurized air in direct contact with the brake fluid forces air molecules into the fluid. FWIW The brake guru said vaccuum bleeders were fine to use in his opinion and he was indifferent about speed bleeders. I think they "outlawed" that type of bleeder... I haven't seen one in years... the other point... I think that's only valid assumming stock or near stock brakes... the 19mm should still put out more MAXIMUM throughput for big brakes that need it... true for the same force, you will get less pressure using the 19mm m/c... but that is only a good point until you reach the max output(not pressure... volume) from a 17mm, that is when you need the 19mm correct me if I'm wrong... I'm not a physicist or a brake specialist, this is just what I've been told... |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 10th June 2024 - 11:47 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |