 Relay Board Wiring Mess, PO's Rewire - Need A Little Help |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| bandjoey |
 Sep 25 2011, 09:00 PM
Post
#1
|
|
bandjoey  Group: Members Posts: 4,935 Joined: 26-September 07 From: Bedford Tx Member No.: 8,156 Region Association: Southwest Region  |
The PO cut the Yellow Wire where it comes from below the relay board up to the pin connector and spliced on a 12" red wire, (#1)and then taped off the end, so it's a dead wire. (IMG:style_emoticons/default/blink.gif)
He then added a red wire from the ignition switch, through the firewall, (#2) and tied it into the yellow wire going into the wire harness moving down towards the starter. What would I do to make this right? It's a '73 original 1.7, switched by the PO to a 1.8 with carbs, and I'm switching that to a 2.0 with carbs and want to get the red wire off the ignition switch. Also, in the other picture, he cut off a Blue wire and taped it off. Where does this go and what does it do and do I need it? Attached image(s)  
|
   |
 
|
  |
Replies
| Mike Bellis |
Sep 25 2011, 10:23 PM
Post
#2
|
|
Resident Electrician Group: Members Posts: 8,348 Joined: 22-June 09 From: Midlothian TX Member No.: 10,496 Region Association: None 
|
Seat belt relay problably went out and he bypassed it. Just reconnect the yellow at the ignition switch, jumper at the seat belt relay and correct the relay board. Done!
|
|
|
|
Posts in this topic
bandjoey Relay Board Wiring Mess Sep 25 2011, 09:00 PM
Dave_Darling The yellow wire should go from the ignition switch... Sep 25 2011, 10:45 PM
kg6dxn
The yellow wire should go from the ignition switc... Sep 25 2011, 10:59 PM rwilner Not sure about your specific problem but I solved ... Sep 26 2011, 06:43 AM rnellums How is your build coming? chances at making MUSR? ... Sep 28 2011, 09:52 AM Jeff Bowlsby That blue wire is not stock, if it were me I would... Sep 28 2011, 01:22 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd April 2026 - 03:38 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.