 Marks on push rods |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jmargush |
 Oct 2 2011, 05:38 PM
Post
#1
|
|
Member  Group: Members Posts: 484 Joined: 8-June 04 From: Goshen, IN Member No.: 2,176  |
I torn down the 2.0 just bought recently and was curious as to what these polished or machined bands on the pushrods are?
Attached thumbnail(s) 
|
   |
 
|
  |
Replies
| McMark |
Oct 3 2011, 10:16 AM
Post
#2
|
|
914 Freak! Group: Retired Admin Posts: 20,180 Joined: 13-March 03 From: Grand Rapids, MI Member No.: 419 Region Association: None |
Took some good pictures of the wire install.
The wire should be sitting on the lip of the pushrod tube, not inside. It should be below the pushrod, not on top of it.   The wire clips into the notches in the rocker arm shaft collars (all of which should be pointing down).  |
|
|
|
Posts in this topic
jmargush Marks on push rods Oct 2 2011, 05:38 PM
CrashDown It almost looks like they were turned on a lathe..... Oct 2 2011, 05:42 PM Valy This is the 3rd one in a month.
The spring holding... Oct 2 2011, 05:53 PM jmargush Thanks Oct 2 2011, 06:14 PM ppetion I noticed the same thing on my engine. Does anyone... Oct 2 2011, 07:00 PM McMark The simplest description of how it should be insta... Oct 2 2011, 08:18 PM r_towle upper flat sections go into the rocker arm holders... Oct 2 2011, 08:26 PM
r_towle
upper flat sections go into the rocker arm holder... Oct 3 2011, 06:22 AM ppetion Here is a picture of how mine is installed.
but if... Oct 2 2011, 09:34 PM r_towle The tube rotates, and so does the valve.
that is b... Oct 2 2011, 10:21 PM McMark Those springs are completely wrong. Oct 2 2011, 10:50 PM vsg914 Ppetion, you springs are not installed properly. T... Oct 3 2011, 04:41 AM Dave_Darling That's exactly where they should be, McMark... Oct 3 2011, 05:17 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 12th July 2025 - 03:00 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.