Joes 2056 build thread, Its Driving again !!!!!!!!!!!!!!!! Options

[jsayre914]

I have been searching all the 2056 threads. Their should really be a 2056 for dummies thread (IMG:style_emoticons/default/biggrin.gif)

I plan on building a 2056 D-jet from my stock 2.0 1973 motor. I have been collecting parts since 2009 (IMG:style_emoticons/default/rolleyes.gif)

Here is what I got so far:

2.0 motor (havent split it yet)
D-Jet system off my 73
4 cleaned & Tested injectors
new wiring harness from bowlsby
new tps board
new hoses
rabby 9550 cam kit
1.8 rockers and swivel feet
aa 96mm cylinder & pistons

I might be forgettin a few things, it has been a while. (IMG:style_emoticons/default/idea.gif)

The heads should be sent out within the week to be checked and prepared with new seats, valves, etc. And I will be splitting the case open this week also. All the cool kids are doing it (IMG:style_emoticons/default/smile.gif)

What other thing do I need to purchase as I begin???

gaskets, bearings, flywheel ??? (IMG:style_emoticons/default/confused24.gif)

also what tools are required other than the basic tools?

I never done this before
(IMG:style_emoticons/default/hide.gif)


thanks
Joseph

[VaccaRabite]

Warrior Motors in Dallastown PA (near York). Probably a good 2 hours from S/C New Jersey. He does a LOT of v8 stuff, but always has VW stuff in his shop as well. he did my T4 case, and has done all the machine work for the 350 I'm building.

At one point Mark talked me out of the more expensive option as it would not have added benefit from my configuration. That alone save me ~$500. He is a stand up guy.

Zach