![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
JawjaPorsche |
![]()
Post
#1
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 3,463 Joined: 23-July 11 From: Clayton, Georgia Member No.: 13,351 Region Association: South East States ![]() |
I have 73 1.7 engine that had green injectors installed incorrectly several years ago.
The green injectors are for a 1.8 or 2.0. The green injectors also spray too much fuel. After I replace the green with the correct yellow injectors, is there any engine adjustments I need to do? Thank you so much in advance for your response and help. |
![]() ![]() |
914_teener |
![]()
Post
#2
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 5,264 Joined: 31-August 08 From: So. Cal Member No.: 9,489 Region Association: Southern California ![]() |
Check with Bruce Stone. He has plenty of yellow injectors I think still.
I suggest you check the MPS for vacum and have the injectors checked cleaned and flow tested by a reputabl vendor like Witchhunter or others listed here. When they rebuild the pintile caps they don't always use the same color. I had mine rebuilt and the caps are black now. Most important thing is that they are injecting fuel with the correct rate and with a good pattern and NOT leaking around the base. If you haven't done this in 15 years........Time that you did. Check with Bruce. |
JawjaPorsche |
![]()
Post
#3
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 3,463 Joined: 23-July 11 From: Clayton, Georgia Member No.: 13,351 Region Association: South East States ![]() |
Good Advice! I have already sent my injectors to Witchhunter and they did a great job on the rebuild. I also replaced the elbow hoses to the injectors. I also got some good FI clamps too!
Terry Check with Bruce Stone. He has plenty of yellow injectors I think still. I suggest you check the MPS for vacum and have the injectors checked cleaned and flow tested by a reputabl vendor like Witchhunter or others listed here. When they rebuild the pintile caps they don't always use the same color. I had mine rebuilt and the caps are black now. Most important thing is that they are injecting fuel with the correct rate and with a good pattern and NOT leaking around the base. If you haven't done this in 15 years........Time that you did. Check with Bruce. |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 9th May 2025 - 09:38 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |