 Wiper switch differences, trying to add an elec. washer switch |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| peteyd |
 Feb 6 2012, 10:06 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 739 Joined: 27-March 08 From: Elora, Ontario, Canada Member No.: 8,858 Region Association: Canada  |
I am trying to figure out what I have here. I noticed that there are two different wiper switches available. 70-72 and 73-76.
This is the one that is in the best condition. Notice that it only has four pins on the left side.  I have already attached a switch that I got from davep, which will trigger my electric washer pump that I plan to install.  This is the second one that I have. Being in worse condition out of the two. It has five pins on the left side. The extra one being a brown, which is ground correct?  The switch is also different in that the plunger that would activate the washer fluid has an electrical contact  I am running a wiring harness from a 72 car. Which switch do I need to use? Am i missing pieces from the first switch maybe? Im stumped here... Pete |
   |
 
|
  |
Replies
| Cap'n Krusty |
Feb 7 2012, 02:56 PM
Post
#2
|
|
Cap'n Krusty Group: Members Posts: 10,794 Joined: 24-June 04 From: Santa Maria, CA Member No.: 2,246 Region Association: Central California |
A switch from a '77 924, Rabbit, or Scirocco works. It's NLA, though.
The Cap'n |
|
|
|
| Valy |
Feb 7 2012, 05:47 PM
Post
#3
|
|
Senior Member Group: Members Posts: 1,677 Joined: 6-April 10 From: Sunnyvale, CA Member No.: 11,573 Region Association: Northern California |
QUOTE(Cap'n Krusty @ Feb 7 2012, 12:56 PM)  A switch from a '77 924, Rabbit, or Scirocco works. It's NLA, though. The Cap'n There are reproductions available. Not great but good enough. http://www2.cip1.com/ProductDetails.asp?Pr...C-111-953-519-G |
|
|
|
Posts in this topic
peteyd Wiper switch differences Feb 6 2012, 10:06 PM
SirAndy I am running a wiring harness from a 72 car. Which... Feb 6 2012, 10:34 PM jim_hoyland See: http://www.914world.com/bbs2/index.php?sho..... Feb 7 2012, 07:49 AM peteyd
See: http://www.914world.com/bbs2/index.php?sho.... Feb 7 2012, 09:25 AM Valy I've done a lot of research on this topic. Her... Feb 7 2012, 12:19 PM
SirAndy
2. The 5 wire switch adds the timed delay relay ... Feb 7 2012, 12:29 PM
Valy
2. The 5 wire switch adds the timed delay relay... Feb 7 2012, 01:14 PM SirAndy If you count on the relay to power the pump when y... Feb 7 2012, 02:16 PM Valy
If you count on the relay to power the pump when ... Feb 7 2012, 06:06 PM jkb944t
I've done a lot of research on this topic. He... Jun 20 2018, 10:30 AM peteyd Great!
Thank you Valy for all that info. I no... Feb 7 2012, 02:36 PM peteyd
A switch from a '77 924, Rabbit, or Scirocco ... Feb 7 2012, 05:35 PM Krieger
There are reproductions available. Not great but... Feb 28 2012, 10:37 PM Valy
There are reproductions available. Not great bu... Feb 28 2012, 11:01 PM Krieger Which fuse Burns? -5th one from right, it has the ... Feb 29 2012, 07:59 PM Valy Here is the best solution in my opinion, using the... Feb 7 2012, 06:16 PM peteyd
Here is the best solution in my opinion, using th... Feb 7 2012, 07:32 PM Valy
Here is the best solution in my opinion, using t... Feb 7 2012, 08:10 PM Eric_Shea Update.
Many Thanks to Valy for the countless e-m... Feb 28 2012, 01:01 PM Bartlett 914 I did a little research on this as well. If you wa... Feb 29 2012, 08:35 AM Eric_Shea Interesting Mark. So if I pull my stalk and activ... Feb 29 2012, 09:25 AM Valy
Interesting Mark. So if I pull my stalk and acti... Feb 29 2012, 09:44 AM Bartlett 914
Interesting Mark. So if I pull my stalk and acti... Feb 29 2012, 01:54 PM Valy DELETED Feb 29 2012, 02:26 PM Eric_Shea Whew... Feb 29 2012, 10:01 AM Bartlett 914 IIRC the brown white wire to the intermittent rela... Feb 29 2012, 02:23 PM Valy Try this:
ignition off. Put the which in high spe... Feb 29 2012, 08:15 PM Krieger I put a 16 amp in and put the wiper switch all the... Feb 29 2012, 08:55 PM Valy
I put a 16 amp in and put the wiper switch all th... Feb 29 2012, 09:17 PM Krieger So I am measuring between the ground terminal on t... Feb 29 2012, 09:55 PM Krieger Wipers didn't move. I am going to pull out the... Feb 29 2012, 09:27 PM Krieger Plug Feb 29 2012, 10:14 PM Valy That's the signal switch connector. Look at th... Feb 29 2012, 10:26 PM Krieger Doh! I figured that out and this is what I... Feb 29 2012, 10:34 PM Valy OK.
Green/white shows that your wipers are probabl... Feb 29 2012, 10:44 PM Krieger black/purple 10.7
black/blue 10.2 Feb 29 2012, 10:53 PM Krieger Just got an old wiper switch of unknown origin. P... Feb 29 2012, 11:03 PM Valy
Just got an old wiper switch of unknown origin. ... Mar 1 2012, 12:42 AM Eric_Shea Andy... It's your switch. ;)
Happy to help... Feb 29 2012, 11:19 PM Valy Eric, I knew you're going to master it! ;... Mar 1 2012, 12:36 AM jt914-6 For those who own a '70-71 (I think that is th... Mar 1 2012, 07:09 AM Krieger I'l get back into this tonight when I get home... Mar 1 2012, 09:57 AM Krieger Hey, I'm at it again.
Here are some observat... Mar 1 2012, 09:16 PM Valy Your backdate column is grounded. Check from somet... Mar 1 2012, 09:37 PM Krieger There was a small "protrusion" I filed ... Mar 1 2012, 10:01 PM Krieger The protrusion was similar to the top right of you... Mar 1 2012, 10:07 PM Valy :trophy:
Happy to help :) Mar 1 2012, 11:15 PM Valy Positive (99% sure but I can't check right now... Jun 20 2018, 10:28 PM Valy Yes, it's 12v. Jun 21 2018, 01:12 AM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd November 2025 - 04:14 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.