 Got Heater S-tube gaskets'? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| JeffBowlsby |
 Mar 17 2012, 10:03 PM
Post
#1
|
|
914 Wiring Harnesses  Group: Members Posts: 8,534 Joined: 7-January 03 From: San Ramon CA Member No.: 104 Region Association: None 
 |
Anyone else have these gaskets (the two at the bottom)? They were glued into the edge channel on the S-tube hot air ducts where the clamp onto the fan housing...I have not seen these before.
Has anyone bought these new? Got PN's? I don't see them in PET. Attached image(s) 
|
   |
 
|
  |
Replies
| rhodyguy |
Mar 19 2012, 12:53 PM
Post
#2
|
|
Chimp Sanctuary NW. Check it out. Group: Members Posts: 22,093 Joined: 2-March 03 From: Orion's Bell. The BELL! Member No.: 378 Region Association: Galt's Gulch |
for cheapo gaskets make a VERY slight bead of black RTV on what would be the mating surfaces of the clamping pieces and the inside edge of the branch ducting where the meet the heat exchangers. allow it to fully setup prior to install. one vendor used to list them in their catalog. quite expensive for what you get.
k |
 |
|
Posts in this topic
Jeff Bowlsby Got Heater S-tube gaskets'? Mar 17 2012, 10:03 PM
pilothyer Hi Jeff, A few years back I bought the new ones, W... Mar 17 2012, 11:48 PM pete000 I made the narrow one from a valve cover cork gask... Mar 18 2012, 12:27 AM
bigkensteele
.... Should be easy to make from gasket blank she... Mar 18 2012, 05:42 PM Phil Plummer Hello Iam doing a 914/6 conversion with a 3.0 goin... Mar 18 2012, 09:39 PM Jeff Bowlsby Thanks for the replies. I guess no one has the tw... Mar 19 2012, 01:25 PM Bartlett 914 I used an o-ring. Worked OK but I suspect the RTV ... Mar 19 2012, 02:22 PM 9146986 Based on advice from Brad Mayeur, I've used th... Mar 20 2012, 08:24 AM euro911 I run without any gaskets. Is there some real dang... Mar 30 2012, 01:57 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 10th June 2024 - 12:41 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.