Heat Exchangers, Jet Hot or ceramic coatings Options

[david63]

The car I am working on has a set of nice heat exchangers. They are original and of course not stainless steel. They have a few dents, etc but overall are in good condition.

My question is how well does the "jet-hot" or ceramic coatings perform on these steel exchangers? I have seen lots of exhaust systems for other cars done with these products and it is amazing. Really nice finish, lowers temperatures, no real downside if done correctly.

I know the heat exchangers would be cleaned and prepped then the coatings are applied both inside the piping and on the exterior of the entire system. I think it would work well and could be a great option to stainless steel (getting hard to find these in the used world in good shape).

Please advise?

[david63]

Thanks for the replys. I agree that new metal coats better. Since I posted this I read something that said the vendor that does the coating wants to prep the metal themselves. Not sure if they sandblast or media blast but there is some concern with residue from the metal prep.

Just thinking out loud but I feel like a set of exchangers that are ceramic coated would hold up almost as good as the stainless steel and I could pick a color closer to a factory gray (especially for the way most of us drive our teeners).