carb guru needed |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
carb guru needed |
ruddyboys |
May 21 2004, 04:03 PM
Post
#1
|
Hummel eigentümer Group: Members Posts: 594 Joined: 3-March 04 From: Monroe, NY Member No.: 1,749 Region Association: North East States |
I have dual webber 40 IDF, the carb was leaking through the accelerator pump diaphragm. After replacing it the carb over flows throug the top? I checked the needle valve and it moves freely and is attached to the floats. The floats also move freely. Could it be the floats need to be adjusted, if so how. (IMG:style_emoticons/default/pissoff.gif)
|
94teener |
May 21 2004, 04:15 PM
Post
#2
|
Member Group: Members Posts: 209 Joined: 6-February 04 From: Jacksonville, FL Member No.: 1,636 |
If the floats are properly set per Weber and the needle valves seem to be
aligned correctly, it should not overflow. Check to see that you are not pushing more than about 2.5 psi fuel pressure. You can significantly improve the carbs by installing Gross Jets by D&G Valve, I think, in place of the needle valves. Phil |
Lo-Fi Version | Time is now: 10th June 2024 - 02:10 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |