 Pedal Cluster |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Bullet |
 May 26 2004, 12:06 AM
Post
#21
|
|
Member  Group: Members Posts: 116 Joined: 16-April 04 From: Newberg, OR Member No.: 1,940  |
I'm trying to remove my pedal cluster so that i can replace the pedal bushings. I was able to remove the 2 nuts towards the drivers seat. But the 2 against the bulk head i cant get a soket on them. I crawled way up under there to take a closer look and see what looks like welds on the bold heads. At first i thought it was just some corrosion but after about 50 hard whacks with a chisle i am convinced that they are welds. My qestions is: how the hell do i get theese last 2 bolts out?
|
   |
 
|
  |
Replies
| Trekkor |
May 26 2004, 12:29 AM
Post
#22
|
|
I do things... Group: Members Posts: 7,809 Joined: 2-December 03 From: Napa, Ca Member No.: 1,413 Region Association: Northern California |
Actually, the studs are tack welded to the pan. The ped-assym is fitted over the studs and held in place with 13mm nuts. This area is a rust pond if water leaks into your car...Like mine.
I just did this. The studs will shear off. Use an air chisel to press the old studs out. Have an assistant help you by holding a wrench on new bolts or weld in new studs. No problem! |
|
|
|
Posts in this topic
Bullet Pedal Cluster May 26 2004, 12:06 AM
Mueller wrong side !!!!!
you need to ... May 26 2004, 12:09 AM Kargeek I believe they are studs that go through the floor... May 26 2004, 12:09 AM Mueller oh yea, they are not bolts, they are studs which a... May 26 2004, 12:10 AM Bullet Shit!!!! i wish that i would have ... May 26 2004, 12:12 AM Mueller QUOTE
Levi dinomium :agree:
CUBS Win CUBS WIN!! May 26 2004, 12:49 AM Bullet SirAndy Eric_Shea Woa... the studs are "not" tack welded to the pan.... May 26 2004, 02:55 PM Eric_Shea Had the camera out so I took some pics... the nuts... May 26 2004, 04:23 PM Eric_Shea Here's the inside view showing the welds on th... May 26 2004, 04:23 PM Eric_Shea The pictures may seem unclear because the body is ... May 26 2004, 04:25 PM trekkor Those aren't the bolts in question. It's t... May 26 2004, 07:33 PM Bullet I got the pedals out today. OMG there were a ton ... May 26 2004, 08:25 PM Levi Eric_Shea QUOTE
Eric_Shea QUOTE
trekkor Quote trekkor:<... May 27 2004, 08:19 AM
Bullet I used my sand blaster to get most of the rust off... May 28 2004, 08:09 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 08:55 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.