 Need info on installing intermittent wiper relays |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| JeffBowlsby |
 Dec 10 2012, 08:43 AM
Post
#1
|
|
914 Wiring Harnesses & Beekeeper  Group: Members Posts: 8,907 Joined: 7-January 03 From: San Ramon CA Member No.: 104 Region Association: None 
 |
I understand the wiper relays will work for 1972-76 914s, because these cars have the brown/black wres in the main harness.
Which wiper lever switches will work with this…? I understand that a 924 switch will work. Got part numbers that work with the relay? 914.613.915.14 Stock 72-74 wiper switch? 914.613.915.15 Stock 75-76 wiper switch? Is there a tab on the wiper switch that needs to be removed for the intermittent function? Where exactly is the tab? Any photos? TIA |
   |
 
|
  |
Replies
| Eric_Shea |
Dec 11 2012, 11:52 AM
Post
#2
|
|
PMB Performance Group: Admin Posts: 19,304 Joined: 3-September 03 From: Salt Lake City, UT Member No.: 1,110 Region Association: Rocky Mountains  |
QUOTE Doesnt explain Jeffs question, & Andys comment? Why use a 924 switch assembly if the OE 914 switch will work? Electric lead for washer pump all in one switch. QUOTE While the 924 switch will work, it is not the same as a 914 switch. The difference is it brings the switch closer to the steering wheel. If you have meat hooks for hands you tend to hit the switch while turning the wheel. Maybe there are different ones. Mine seems to be the same:  |
|
|
|
Posts in this topic
Jeff Bowlsby Need info on installing intermittent wiper relays Dec 10 2012, 08:43 AM
SirAndy
I understand the wiper relays will work for 1972-... Dec 10 2012, 12:11 PM Eric_Shea I used the 924 switch on my 74 column. The plug is... Dec 10 2012, 01:13 PM
Elliot Cannon
I used the 924 switch on my 74 column. The plug i... Dec 10 2012, 04:58 PM zig-n-zag There is an article written in Up-Fixin der Porsch... Dec 10 2012, 01:29 PM jim_hoyland :agree: The 924 switch was the easiest way to go. Dec 10 2012, 04:38 PM Garold Shaffer While the 924 switch will work, it is not the same... Dec 10 2012, 05:09 PM rdauenhauer Doesnt explain Jeffs question, & Andys comment... Dec 10 2012, 05:34 PM Garold Shaffer
Doesnt explain Jeffs question, & Andys commen... Dec 10 2012, 05:39 PM Jeff Bowlsby "Trim the tab on the steering column cover wh... Dec 10 2012, 07:46 PM 914Sixer Okay, here are the pictures. I just happened to h... Dec 10 2012, 08:18 PM Jeff Bowlsby Thanks Mark, It looks like the steering column co... Dec 11 2012, 10:51 AM Eric_Shea
No, it's the switch. Dec 11 2012, 11:56 AM Eric_Shea For Kevin:
http://www.914world.com/bbs2/uploads_o... Dec 11 2012, 12:01 PM rdauenhauer Eric are the rubber isolators still available new?... Dec 11 2012, 02:10 PM 914Sixer Jeff,
The picture is a little off. The angle of c... Dec 11 2012, 08:24 PM 914Sixer Isolators are still available, about $8 each.... Dec 11 2012, 08:28 PM a914622 So with that figured out can the programable delay... Dec 11 2012, 08:47 PM 914Sixer Relay part number is for a VW Rabbit. Dec 11 2012, 08:57 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 03:24 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.