 How do you get a trunk to open when you don't have a key?, AKA- Dumbass things i've done to my 914- version 82 |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| tornik550 |
 Aug 11 2013, 08:15 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,248 Joined: 29-January 07 From: Ohio Member No.: 7,486 Region Association: None  |
I have never had keys to my trunk since I purchased my car. I only have the ignition keys. I have never really needed to lock my 914 so I never worried about it. The problem is that somehow my trunk ended up locking. How can I get it open? The trunk is empty so not a huge deal but I would like to get into it eventually.
I supposed that I could drill it out if I have to but... |
   |
 
|
  |
Replies
| partwerks |
Aug 12 2013, 04:10 AM
Post
#2
|
|
Senior Member Group: Members Posts: 1,611 Joined: 7-September 06 From: Grand Island, NE Member No.: 6,787 |
I had the solenoid wire break, but at that point in time, my lid did not sit completely down, and so I had some wiggle room to use about a 5/16" rod, and go in at the rear passenger corner and push the plunger down to gain access, but if yours sits down nice and flat, it may not be all that favorable to do.
|
|
|
|
Posts in this topic
tornik550 How do you get a trunk to open when you don't have a key? Aug 11 2013, 08:15 PM
mepstein It's easy with a couple long socket extensions... Aug 11 2013, 08:29 PM
SirAndy It's easy with a couple long socket extensions... Aug 12 2013, 11:19 AM tornik550
It's easy with a couple long socket extension... Aug 12 2013, 11:42 AM Drums66
[quote name='SirAndy' post='1908105' date='Aug 12... Aug 12 2013, 06:41 PM tornik550
It's easy with a couple long socket extension... Aug 12 2013, 11:42 AM Black22 Have a locksmith come by that knows how to "i... Aug 11 2013, 08:56 PM sean_v8_914 remove hinge screws thru eng comp Aug 12 2013, 08:43 AM rhodyguy don't understand why it would lock without tur... Aug 12 2013, 08:50 AM r_towle many long extensions with a 10mm socket on the end... Aug 12 2013, 12:00 PM rdauenhauer Thats the hard way. :headbang:
Do a search on ho... Aug 12 2013, 01:14 PM r_towle this Aug 12 2013, 01:25 PM PanelBilly Go to the locksmith's shop and save the cost o... Aug 12 2013, 05:46 PM FourBlades I found a long set of extensions too wobbly to rem... Aug 12 2013, 06:02 PM rjames As others have said, you don't have to remove ... Aug 13 2013, 11:26 AM rdauenhauer Rich, Yes
Robert, coat hanger may work but I found... Aug 13 2013, 01:42 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 09:36 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.