1973 loose wires behind the dash Options

[HalfMoon]

Imagine my dismay when today I decided to open the dash (I was trouble shooting a fuel gauge not working-easy fix, PO had cut the wires at the tank for some reason), discovering a huge amount of loose wires. The PO had installed a completly different tach so I'm hoping alot of these wires (11) had a purpose for being disconnected. Vain hope most likely...
I did notice the brake warning light stays on all the time...and of course nothing else works (except the fuel gauge that I just hooked back up). The car is a v-8 converted teener so alot of stuff may be disconnected for that reason as well.
The real problem is that I'm VERY color blind. I can read a schematic reasonably well if I know what color wires I'm looking at on the car, which brings us to the reason for this post!
Could someone help me identify the loose wires I've numbered in the enclosed photograph? What color corresponds to the numbered wires? With that data I should be able to figure out what was supposed to go where and assimilate if it was disconnected for purpose.
Wiring and color blindness can be a serious challenge, so any help is appreciated :-)
David
Oh and btw, if you click on the image and then click again you'll get a very close view

[bulitt]

Moonman- I happened to label the back of my cluster on my 73. Couldn't recall I did it, oldsheisers.

So here is a pic.



On the speedo the wire coming out the bottom is white/green
--------
On the tach the wires from left to right are-
brown
brown/black
red

and the wire coming out of the bottom of the tach is white/blue
-----------
On the combo clockwise in pic from 1100pm
red
green
brown

the rest of your wires you should be able to determine from Jeffs diagram- black/blue=gauge lights

[HalfMoon]

Moonman- I happened to label the back of my cluster on my 73. Couldn't recall I did it, oldsheisers.

So here is a pic.



On the speedo the wire coming out the bottom is white/green
--------
On the tach the wires from left to right are-
brown
brown/black
red

and the wire coming out of the bottom of the tach is white/blue
-----------
On the combo clockwise in pic from 1100pm
red
green
brown

the rest of your wires you should be able to determine from Jeffs diagram- black/blue=gauge lights

Extremely helpful! (IMG:style_emoticons/default/beer.gif)