 trans removal |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Harpo |
 Sep 22 2013, 02:09 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,304 Joined: 21-August 11 From: Motor City aka Detroit Member No.: 13,469 Region Association: None  |
I need to pull my trans. Do I have to pull the engine with it?
I believe that when I rebuilt my trans I may have put in an older differential. I have some slop in my output flanges that appear to be the result from not enough back lash on my differential bearings. Thanks David |
   |
 
|
  |
Replies
| Cap'n Krusty |
Sep 22 2013, 09:51 PM
Post
#2
|
|
Cap'n Krusty Group: Members Posts: 10,794 Joined: 24-June 04 From: Santa Maria, CA Member No.: 2,246 Region Association: Central California |
Before you do all that, better think about what you're doing. There's ALWAYS slop in the output flanges.
The Cap'n |
|
|
|
Posts in this topic
Harpo trans removal Sep 22 2013, 02:09 PM
SirAndy Do I have to pull the engine with it?
No, but you... Sep 22 2013, 02:13 PM Dave_Darling Loosen the engine mount bolts so you can pivot the... Sep 22 2013, 02:31 PM Harpo Thanks guys Sep 22 2013, 02:38 PM ruddyboys wouldn't it be easier to remove the engine and... Sep 23 2013, 07:22 AM
ripper911
wouldn't it be easier to remove the engine an... Sep 23 2013, 07:26 AM rjames Step by step removal of the trans courtesy of Peli... Sep 23 2013, 10:00 AM CptTripps I did it in 30min on Saturday. Now, I have a V8 co... Sep 23 2013, 11:00 AM Harpo The slop was not the diff to the trans but my out ... Sep 23 2013, 04:44 PM Harpo Sorry this is the location where the diameters are... Sep 23 2013, 04:47 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 15th July 2025 - 11:35 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.