 Main bearing info on box, Info written on bearing box - after line bore |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 0396 |
 Oct 8 2013, 12:04 AM
Post
#1
|
|
Advanced Member  Group: Members Posts: 2,046 Joined: 13-October 03 From: L.A. Calif Member No.: 1,245 Region Association: Southern California  |
All,
Can someone educate me on what this box of bearings is telling me? Back ground info: dropped of crank that had 10 under the mains and had standard rods. The above parts were dropped off with a case , machine shop line bored and provide me the above box of bearings …. Yes I gave them the crank and rods too. Can I use these bearings based on the above info? Thanks in advance Attached thumbnail(s) 
|
   |
 
|
  |
Replies
| Jake Raby |
Oct 8 2013, 04:30 AM
Post
#2
|
|
Engine Surgeon Group: Members Posts: 9,398 Joined: 31-August 03 From: Lost Member No.: 1,095 Region Association: South East States |
.020 on the OD (1st cut on the case)
.010 on the ID (1st cut on the crank) STD thrust deck |
|
|
|
| 0396 |
Oct 8 2013, 07:56 AM
Post
#3
|
|
Advanced Member Group: Members Posts: 2,046 Joined: 13-October 03 From: L.A. Calif Member No.: 1,245 Region Association: Southern California |
QUOTE(Jake Raby @ Oct 8 2013, 03:30 AM)  .020 on the OD (1st cut on the case) .010 on the ID (1st cut on the crank) STD thrust deck Jake thanks for the reply. If I interpret this correctly ,they had to line bore the case .020 to accommodate the .010 on the crank for me to utilize these bearings? |
|
|
|
Posts in this topic
396 Main bearing info on box Oct 8 2013, 12:04 AM
jsconst
.020 on the OD (1st cut on the case)
.010 on the... Oct 8 2013, 08:05 AM 396
[quote name='396' post='1937562' date='Oct 8 2013... Oct 8 2013, 08:24 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st July 2025 - 09:47 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.