thelogo. charging your dead optima, cheap fix procedure Options

[rhodyguy]

not wanting to buy a new battery to replace my almost fully discharged (.4 v) one i found this online. take a KNOWN fully charged bat and connect the dead one in parallel with a set of jumper cables, +to+ and -to-. connect the charger to the dead bat and charge for 1 hour. then remove the jumpers and charge the previously dead one as normal. it worked GREAT!! not wanting to overcharge by letting the trickle charger run all night i stopped last evening and i checked the v this am. lost .1 volts. on a recharge mode this am for a full charge. if successful its money in the bank.

[thelogo]

not wanting to buy a new battery to replace my almost fully discharged (.4 v) one i found this online. take a KNOWN fully charged bat and connect the dead one in parallel with a set of jumper cables, +to+ and -to-. connect the charger to the dead bat and charge for 1 hour. then remove the jumpers and charge the previously dead one as normal. it worked GREAT!! not wanting to overcharge by letting the trickle charger run all night i stopped last evening and i checked the v this am. lost .1 volts. on a recharge mode this am for a full charge. if successful its money in the bank.

Please advise anyone who know what I'm talkin about

Black and decker charger/maintain er seems to be ok

Multi meter is reading on the 20 v setting

12.23

And
With mainytaner on

13.20


But im hesitant to leave the maintainer in attended
So it s on like only a hour a day .

Called black and decker customer service to
Find out about agm, charging , they did a automated
Voice then just hung up +





"
I'm comin down there "

Ty Cobb.,

"what a ballplayer "

[thelogo]

not wanting to buy a new battery to replace my almost fully discharged (.4 v) one i found this online. take a KNOWN fully charged bat and connect the dead one in parallel with a set of jumper cables, +to+ and -to-. connect the charger to the dead bat and charge for 1 hour. then remove the jumpers and charge the previously dead one as normal. it worked GREAT!! not wanting to overcharge by letting the trickle charger run all night i stopped last evening and i checked the v this am. lost .1 volts. on a recharge mode this am for a full charge. if successful its money in the bank.

Please advise anyone who know what I'm talkin about

Black and decker charger/maintain er seems to be ok

Multi meter is reading on the 20 v setting

12.23

And
With mainytaner on

13.20


But im hesitant to leave the maintainer in attended
So it s on like only a hour a day .

Called black and decker customer service to
Find out about agm, charging , they did a automated
Voice then just hung up +





"
I'm comin down there "

Ty Cobb.,

"what a ballplayer "

And its optima red top , and it appears to be manufactured in 2008

So May be its time is up ???