Correct 914-6 carpet.....for a 70, Where is it, who has it Options

[porbmw]

Anyone knowledgeable out there re correct, or so damn close to correct no one can tell....carpet for a 70

Would be quite alright with just buying a few yards of it, and having it cut and sewn...but sure would like to find the material

Thanks

Paul

[Mikey914]

Possible the floorboards have been replaced?
the later stamped ones do not have then in the pan.
The heal pad I can do. The problem is the factory carpets are molded. I'm working on doing the driver's side long molded as it's difficult to get it to glue it in correctly.
Mark

[porbmw]

Possible the floorboards have been replaced?
the later stamped ones do not have then in the pan.
The heal pad I can do. The problem is the factory carpets are molded. I'm working on doing the driver's side long molded as it's difficult to get it to glue it in correctly.
Mark

As far as I can recall, I have pretty well the entire set of 914-6 carpet from my original 6....and recollection tells me that the floor mats had a peculiar waffle pattern of wax/plastic like material on the back, to give the carpet rigidity...

I'll have to go check on it...and see about getting some pics in here ( I am a self professed luddite)...probably will beg off on my buddy Jake to send them.

This is one of those items that I'd bet the majority of members would like to have sorted out/replaced correctly....

When I get a chance to look at my daughter's 74, will see if the backing is any different from that of the 6