 Tranny issue, What are these and are they available ? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jim_hoyland |
 Feb 3 2014, 02:55 PM
Post
#1
|
|
Get that VIN ?  Group: Members Posts: 9,314 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California 
 |
I had been having some shifting issues going into 1st and reverse on occasion. My mechanic showed me the worn parts and said they need replacement. Not sure what they are called, and want to know if they are available new.
Big thanks to Bruce Stone; he brought the parts and saved the day ! Lastly, why did they wear out ? Attached image(s)   
|
   |
 
|
  |
Replies
| type47 |
Feb 3 2014, 02:58 PM
Post
#2
|
|
Viermeister Group: Members Posts: 4,254 Joined: 7-August 03 From: Vienna, VA Member No.: 994 Region Association: MidAtlantic Region |
Not sure what you're showing, you have 3 pix. It would seem to me the first pic is of a tube or the ball the shift fork pivots on. The second is the fork which should have a white plastic cup/bushing/socket/? in the hole for the pivot ball, the third is the shift fork. What are you asking about?
There is a link to the 914 PET in my signature. These parts are shown in an exploded diagram in 301-10 along with part numbers. |
|
|
|
| Mblizzard |
Feb 3 2014, 03:04 PM
Post
#3
|
|
Advanced Member Group: Members Posts: 3,033 Joined: 28-January 13 From: Knoxville Tn Member No.: 15,438 Region Association: South East States |
QUOTE(type47 @ Feb 3 2014, 12:58 PM)  Not sure what you're showing, you have 3 pix. It would seem to me the first pic is of a tube or the ball the shift fork pivots on. The second is the fork which should have a white plastic cup/bushing/socket/? in the hole for the pivot ball, the third is the shift fork. What are you asking about? There is a link to the 914 PET in my signature. These parts are shown in an exploded diagram in 301-10 along with part numbers. Took one apart that was missing the white plastic cup and there was not much left of the ball. This ball looks better than the one that was put together with out the cup so I guess it is the plastic cup? |
|
|
|
Posts in this topic
jim_hoyland Tranny issue Feb 3 2014, 02:55 PM
jim_hoyland The plastic cup was missing; I have a replacement.... Feb 3 2014, 03:13 PM 76-914 That's why it's worn, Jim. No cup washer. ... Feb 3 2014, 03:32 PM
jim_hoyland
That's why it's worn, Jim. No cup washer.... Feb 3 2014, 04:39 PM Dave_Darling Usually it should be replaced every time you repla... Feb 3 2014, 04:49 PM r_towle It is suggested that you replace all your plastic ... Feb 3 2014, 11:14 PM jim_hoyland New info: I found the clutch release fork is NLA;... Feb 4 2014, 01:02 PM rhodyguy jim, you'll a new release lever retaining clip... Feb 5 2014, 07:33 AM jim_hoyland
jim, you'll a new release lever retaining cli... Feb 5 2014, 07:43 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd June 2024 - 06:50 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.