71 won't go to 4th or 5th, my is 71 running for the first time, 4th and 5th not there? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
71 won't go to 4th or 5th, my is 71 running for the first time, 4th and 5th not there? |
CMXIV |
Mar 11 2014, 05:57 PM
Post
#1
|
Newbie Group: Members Posts: 13 Joined: 21-July 12 From: Washington DC Member No.: 14,706 Region Association: MidAtlantic Region |
so for the first time since i owned this 71 1.7 it is running! On my maiden test voyage 4th and 5th gear were not available. it seems like the shifter is not moving far enough to the right. i took it apart and saw no obstructions. It seemed like the bar in the engine compartment was hitting the headers, and upon inspection the motor mounts looked low to me. i jacked up the engine and tried to tighten the mounts, no luck. (maybe pb blaster will help that). anyway, it still didn't get 4th or 5th with the engine jacked up off the shifter bar. when i took the shift lever out, it seemed like it may be the problem, it only moved a bit before hitting the plate on the underside. any ideas would be greatly appreciated. thanks in advance. Lee
|
Dave_Darling |
Mar 12 2014, 05:23 PM
Post
#2
|
914 Idiot Group: Members Posts: 14,991 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California |
Another possibility--an unpleasant one--is that the clutch tube has come loose inside the center tunnel, and the bottom of the shifter is hitting it before it can move over far enough to select the 4/5 plane.
--DD |
CMXIV |
Mar 12 2014, 08:50 PM
Post
#3
|
Newbie Group: Members Posts: 13 Joined: 21-July 12 From: Washington DC Member No.: 14,706 Region Association: MidAtlantic Region |
Another possibility--an unpleasant one--is that the clutch tube has come loose inside the center tunnel, and the bottom of the shifter is hitting it before it can move over far enough to select the 4/5 plane. --DD that sounds quite unpleasant. it turns out the bushing just rear of the shifter it gone! it should be arriving at my house in a week. thank you pelican parts. |
Lo-Fi Version | Time is now: 1st June 2024 - 07:21 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |