 Braking Power |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| lsintampa |
 May 19 2014, 02:18 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 520 Joined: 28-January 13 From: Tampa, FL Member No.: 15,441 Region Association: South East States  |
75 2.0 FI
So I just got my car finally on the road. It's been a long journey, and this is my first 914, so if my question sounds "dumb" - just give me a new 914 driver break. All of the latest "old" cars I've owned (74 TR6, 74 BMW) all had brake boosters. The 914 has no "boost". I find the braking power to be really somewhat below what I expected. What was I expecting? Well, since I have no prior 914 driving experience I really don't know. I'm curious if my "newbie" experience is just that I'm not familiar with the lack of braking power, or if perhaps I may have some issue with my brakes? Rotors all new, pads in good condition, good pedal pressure, 19MM ATE MC from PMB. Any "road tests" I can do to give me some sort of clue if all is well in brake land? Thanks, Len |
   |
 
|
  |
Replies
| wndsnd |
May 21 2014, 05:16 PM
Post
#2
|
|
You wanted a horse, but got a goat. Nobody wants a goat.... Group: Members Posts: 2,861 Joined: 12-February 12 From: North Shore, MA Member No.: 14,124 Region Association: North East States  |
This thread got me thinking that my brakes could be better and I had not bed them. So I went out last night and followed Eric's procedure.
Noticeable improvement. Brakes will lock up without much effort and I have the 17mm MC John. |
|
|
|
Posts in this topic
lsintampa Braking Power May 19 2014, 02:18 PM
ThePaintedMan Have you bedded the pads yet Len? What exactly are... May 19 2014, 02:24 PM URY914 Is the pedal firm? Getting all the air out can be ... May 19 2014, 02:26 PM Elliot Cannon :agree: Make sure they are bled completely. This... May 19 2014, 02:29 PM lsintampa system was bled and bled again
as far as "be... May 19 2014, 03:10 PM
ThePaintedMan
system was bled and bled again
as far as "b... May 19 2014, 03:32 PM
Dave_Darling
system was bled and bled again
Again and again d... May 19 2014, 04:03 PM McMark If the pedal is soft, you need to bleed it more. ... May 19 2014, 03:59 PM yeahmag If the pedal is firm, but low you need to adjust t... May 19 2014, 05:48 PM Eddie914 Len,
What do you mean by stating?
"I find ... May 19 2014, 06:07 PM thelogo As far I know this is one of the best braking 40+ ... May 19 2014, 06:21 PM mepstein Bedding the pads or new ones from Eric are probabl... May 19 2014, 06:48 PM brant Did you reuse pads? May 19 2014, 06:54 PM jmill
or the proper 17mm master :stir: :evilgrin:
O... May 19 2014, 08:54 PM nathansnathan Lupawali's "brake faq" mentions the ... May 20 2014, 07:09 AM ThePaintedMan I have a 19mm - love it.
Its very possible the br... May 20 2014, 07:35 AM era vulgaris
All of the latest "old" cars I've o... May 20 2014, 07:36 AM lsintampa sorry guys,
I didn't realize how many of yo... May 20 2014, 10:16 AM worn
sorry guys,
I didn't realize how many of y... May 21 2014, 09:36 AM McMark Glad to know you are driving it. I went from a 91... May 21 2014, 08:45 PM ThePaintedMan
Then your 914 is not bled out properly. :P
:a... May 22 2014, 07:23 AM worn
Glad to know you are driving it. I went from a 9... May 22 2014, 08:30 AM r_towle
Glad to know you are driving it. I went from a 9... May 22 2014, 09:25 AM McMark Len, the real question that needs answering is,
I... May 20 2014, 10:27 AM flash914 What about flex if the floorboard? That is what I ... May 20 2014, 10:35 AM lsintampa Just went out for a drive.
Pedal is soft.
On smo... May 20 2014, 11:31 AM mepstein
Just went out for a drive.
Pedal is soft.
On sm... May 20 2014, 12:10 PM Racer Chris
...
Pedal is soft.
...
When I say the pedal is so... May 20 2014, 12:45 PM saigon71 As others have suggested, make sure you have the s... May 21 2014, 07:33 AM bandjoey Floor board flex? There are several threads on ma... May 21 2014, 07:44 AM URY914 Isintampa,
What part of T do you live? May 21 2014, 07:27 PM lsintampa I'm in North Tampa .... Carrollwood actually.
... May 21 2014, 08:41 PM stugray For those that say they cannot lock the brakes, th... May 22 2014, 09:19 AM Eric_Shea Bed the pads and bed them again.
Even old pads w... May 22 2014, 07:28 PM lsintampa
Bed the pads and bed them again.
Even old pads ... May 22 2014, 09:03 PM Eric_Shea Also, remember, it's a 40 year old car. A lot ... May 22 2014, 09:15 PM worn
Also, remember, it's a 40 year old car. A lot... May 23 2014, 09:39 AM brant and you still need to upgrade your pads....
were ... May 22 2014, 10:37 PM larss I had about the same problem with my 914/4, could ... May 23 2014, 10:03 AM jmill If your still not happy you can call Eric up and g... May 23 2014, 06:24 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 5th July 2025 - 05:28 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.