Wiring Help, I didn't mark three wires Options

[Ken6432]

I am just getting the engine back in my 914 and have three wires that I did not mark. Can anyone tell me where they go? They come through the tin on the driver's side along with the starter wires. The shortest one in the picture appears to be green with a red (or brown) line, the second longest appears to be black with a red line and the longest one is all black and is a heavier gauge.

(IMG:http://www.914world.com/bbs2/uploads_offsite/farm6.staticflickr.com-17098-1401296558.1.jpg)

Thanks for the help.

Ken

[Ken6432]

I am just getting the engine back in my 914 and have three wires that I did not mark. Can anyone tell me where they go? They come through the tin on the driver's side along with the starter wires. The shortest one in the picture appears to be green with a red (or brown) line, the second longest appears to be black with a red line and the longest one is all black and is a heavier gauge.

(IMG:http://www.914world.com/bbs2/uploads_offsite/farm6.staticflickr.com-17098-1401296558.1.jpg)

Thanks for the help.

Ken

The black is the coil 12v + wire (terminal 30), the black/purple wire is the tach wire (coil terminal 1), and the green/red wire is the oil pressure sender wire.

The Cap'n

Thanks Cap'n

So the black goes to the positive side of the coil and the black/purple goes to the negative side?

Ken