New 914 Owner with a few questions and a bunch of pics Options

[swooshdave]

I drove this thing home yesterday. Horrible shifter, rusted brakes and my knuckles dragged on the instruments. And a silly grin for every minute.

(IMG:http://www.914world.com/bbs2/uploads_offsite/i237.photobucket.com-17475-1402639491.1.jpg)

I'd only driven a 914 once before when I was about 17. I'd looked at one for sale. I was driving a MG Midget at the time and was smitten with the 914's handling. But the 914 was a little out of reach for this teenager back then (mid-80s).

Now the last thing I need right now is another vehicle/project but this guy at work was in a pickle. His son's car was blocking his car, and given the car that was blocked I was more than happy to help get it out... The 914 had been sitting for a couple years and one of the wheels was stuck. I went over last Friday and took the rear wheel off and tapped the e-brake lever and got it unstuck. Disks were pretty rusty too. And the car started with two year old gas.

I went over yesterday and drove the car away. We will not speak of the price. But it was low enough that I couldn't refuse.

What I know:

It's a 1973 1.7 with an EMPI single carb (looks brand new). I was very concerned about rust and there is definitely a hole under the battery. There are a couple small bubbles here and there but looking under the fenders and towards the rocker panel it looks clean. I want to pull the rocker panels to check for sure.

I assume as a 1973 it should have a side shifter but I haven't looked under to check.

(IMG:http://www.914world.com/bbs2/uploads_offsite/i237.photobucket.com-17475-1402639491.2.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i237.photobucket.com-17475-1402639491.3.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i237.photobucket.com-17475-1402639491.4.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i237.photobucket.com-17475-1402639491.5.jpg)

There is a big box full of new parts (rubber seals, ignition parts, gaskets, etc.)

Numbers all match (door sill, windshield, front trunk) but the engine number is throwing me off. It seems to be one digit short? From what I've seem it should be EA00… but this one is EA0… Interestingly I'm not the only person to run across this:

http://www.914club.com/bbs2/index.php?showtopic=154541

Tach seems to be stuck at 3k but does move above that.

There is a big binder full of paperwork that I haven't even looked at.

I need to move another car to a different garage so I can get this one inside and really take a better look at it.

Ok, so now tell me all the things I don't know. (IMG:style_emoticons/default/biggrin.gif)

[swooshdave]

Thanks Cary for stopping by. Great to have a more informed set of eyes on it. Car is turned around. It may have taken a trip around the block to do so. :-)

Headlights don't go on but high beams do. Interesting. Not sure if they are fused separately.

I'll pull the rocker panel but this time I'll let the penetration stuff soak more this time.