 Head light motors, Oh these are fun |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Downerman |
 Jul 2 2014, 06:40 PM
Post
#1
|
|
Member  Group: Members Posts: 168 Joined: 23-April 09 From: Monterey County, California Member No.: 10,296 Region Association: None  |
So, I have ripped out the modified lights and replaced the entire headlight assembly back to stock. Pulled the light switch and the lights went on but no movement in the arms. (I don't have them connected to the larger arm yet. Got the Pelican parts technical doc which is great by the way. So, I pulled both relays (One at a time) and jumped 30 and 87. SHAZAM got the motors to run on both...again one at a time. Then I'm supposed to turn the light switch on and check for 12 Volts on pin 85. Nothing... on either side. I check the grey wire (Extended control line...one of three going to each motor) and I do have 12V... actually 11.56. I pulled two different sets of relays from the back of the car and tried them.... NADA. Do cam-operated switches in these motors go bad? That's what the Doc is saying but on both of them? It's weird that the same conditions are on both motors.
I'm tempted to just buy a set of motors for parts heaven for $100 and try them but thought I would post here and see if this has happned to anyone else. Dave |
   |
 
|
  |
Replies
| VaccaRabite |
Jul 2 2014, 07:26 PM
Post
#2
|
|
En Garde! Group: Admin Posts: 13,728 Joined: 15-December 03 From: Dallastown, PA Member No.: 1,435 Region Association: MidAtlantic Region 
|
If they work when you jump them, then they work.
replace the relays first. then triple check your wiring. Zach |
|
|
|
| Downerman |
Jul 2 2014, 07:37 PM
Post
#3
|
|
Member Group: Members Posts: 168 Joined: 23-April 09 From: Monterey County, California Member No.: 10,296 Region Association: None |
I don't believe that's true per the technical doc that anyone can get on Pelican. You can have power to the motors (Jump them and they run) and still have major issues. Mine according to the Doc, is pointing at a defective cam-operated switch in the motor. I'm just having a hard time digesting that both motors have the same issue.
Dave |
|
|
|
Posts in this topic
Downerman Head light motors Jul 2 2014, 06:40 PM
mepstein $100 is a lot for these motors. They rarely g... Jul 2 2014, 08:02 PM
bdstone914
$100 is a lot for these motors. They rarely ... Jul 2 2014, 10:56 PM mepstein
$100 is a lot for these motors. They rarely... Jul 3 2014, 04:47 AM ClayPerrine This may help your troubleshooting:
How your head... Jul 3 2014, 07:44 AM stugray Another way to test them to see if the motor works... Jul 3 2014, 08:05 AM Downerman I love this site. Thanks for the post about moto... Jul 3 2014, 08:39 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 11:55 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.