 removing rear calipers, what tools do I need? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| mobymutt |
 Jul 3 2014, 03:51 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 553 Joined: 16-December 13 From: Kingston, Ontario, Canada Member No.: 16,770 Region Association: Canada  |
For a '74 /4, with stock brakes. I need to adjust the venting, and I can't remove the inner adjuster covers, thus attempting to remove the calipers to get at them. I can't seem to fit a socket and breaker bar in there, what are my best options for tools to get the bolts loose, assuming I'll have to buy something anyway?
Thanks! Matt |
   |
 
|
  |
Replies
| hndyhrr |
Jul 3 2014, 04:19 PM
Post
#2
|
|
Senior Member Group: Members Posts: 601 Joined: 1-September 13 From: central point,oregon Member No.: 16,332 Region Association: Pacific Northwest 
|
QUOTE(mobymutt @ Jul 3 2014, 02:51 PM)  For a '74 /4, with stock brakes. I need to adjust the venting, and I can't remove the inner adjuster covers, thus attempting to remove the calipers to get at them. I can't seem to fit a socket and breaker bar in there, what are my best options for tools to get the bolts loose, assuming I'll have to buy something anyway? Thanks! Matt lets see mine is a 70, the back side mine i had to use a 4mm allen thru the control arm to get the cap off, then the same allen to adjust vent for the back side. to get caliper off I used a big wrench on caliper bolt with urging from a hammer. |
|
|
|
Posts in this topic
mobymutt removing rear calipers Jul 3 2014, 03:51 PM
SLITS 19mm box end wrench
Needle nose pliers for pad lo... Jul 3 2014, 04:23 PM
mobymutt
19mm box end wrench
Needle nose pliers for pad l... Jul 3 2014, 04:45 PM hndyhrr
19mm box end wrench
Needle nose pliers for pad ... Jul 3 2014, 04:48 PM PlantMan
For a '74 /4, with stock brakes. I need to a... Jul 3 2014, 04:57 PM Dave_Darling I dislike the 19mm open-end wrenches in my set. (... Jul 3 2014, 06:19 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th May 2025 - 02:53 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.