 MegaSquirt Help? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 914Mike |
  Aug 10 2014, 11:45 PM
Post
#1
|
|
Member  Group: Members Posts: 330 Joined: 27-January 03 From: San Jose, CA Member No.: 198  |
It's been a few years, finally got the MS wired up. 2056 with stock 2.0 intakes won't start, all I get is a few pops.
New Yellow top battery helped, the dead Red wouldn't even give me a pop. EDIS-4 is working, great spark, and I can see the timing mark move when I change the settings in the laptop. (Had to rework the trigger wheel from McMark for the EDIS timing to work.) New NAPA fuel pump and filter, new hoses, stock pressure relief valve. Injectors are stock 1.8 with 1.8 resistor block, getting pulses to all of them. WB EGA is connected to dash gauge, it was setup in air a while back. Ideas? I could use some eyes on the laptop, to give the settings a sanity check... |
   |
 
|
  |
Replies
| aircooledtechguy |
Aug 12 2014, 11:25 AM
Post
#2
|
|
The Aircooledtech Guy Group: Members Posts: 1,966 Joined: 8-November 08 From: Anacortes, WA Member No.: 9,730 Region Association: Pacific Northwest |
Check the firing order on the coils to ensure you have the right spark plugs paired-up. Below is a photo of the EDIS coil I used on my Squareback. I used a label-maker to re-label the coils so I wouldn't be confused my the factory Ford labeling which is wrong for our motors.
 |
|
|
|
| 914Mike |
Aug 12 2014, 07:38 PM
Post
#3
|
|
Member Group: Members Posts: 330 Joined: 27-January 03 From: San Jose, CA Member No.: 198 |
QUOTE(aircooledtechguy @ Aug 12 2014, 10:25 AM)  Check the firing order on the coils to ensure you have the right spark plugs paired-up. Below is a photo of the EDIS coil I used on my Squareback. I used a label-maker to re-label the coils so I wouldn't be confused my the factory Ford labeling which is wrong for our motors. Thanks, that checks with what I did. My label is on the side since it's hard to see down into a 914 on jackstands... |
|
|
|
Posts in this topic
914Mike MegaSquirt Help? Aug 10 2014, 11:45 PM
crash914 Can you post your MSL or a log file?
I am running... Aug 11 2014, 07:54 AM Dtjaden I would check things in this order (based on my ow... Aug 11 2014, 08:28 AM
914Mike
I would check things in this order (based on my o... Aug 12 2014, 10:53 AM crash914 I am using 2 squirt/alternating.
RegFuel is 14.4 ... Aug 12 2014, 12:04 PM 914Mike
I am using 2 squirt/alternating.
RegFuel is 14.4... Aug 12 2014, 07:47 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 01:07 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.