![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
falcor75 |
![]()
Post
#1
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,579 Joined: 22-November 12 From: Sweden Member No.: 15,176 Region Association: Scandinavia ![]() ![]() |
I got a pair of front Boge struts from a '69 911. The kind with a M10x30 bolt that holds the lower joint. I ordered new bearings for them but the inner bearing wont go down all the way.....
http://matsgarage.com/wp-content/uploads/2...08/DSC00912.jpg This is as far as the bearing will go... and I'm kinda clueless as to whats wrong. |
![]() ![]() |
bulitt |
![]()
Post
#2
|
Achtzylinder ![]() ![]() ![]() ![]() Group: Members Posts: 4,188 Joined: 2-October 11 Member No.: 13,632 Region Association: South East States ![]() |
Pelican tech notes had this-
I did have some problems getting the hub with new bearings and rotor back onto the spindle. It transpired that the inner bearing was not sitting snugly in the inner race which made it impossible to get the hub onto the spindle. Make sure the greased inner bearing is sitting snugly in the race before presenting the hub to the spindle. Then they suggest slightly tapping the hub with a hammer to get it onto the spindle. Here is another article- http://forums.pelicanparts.com/porsche-911...e-question.html Make sure your spindles are clean. Put the hubs with bearings installed out in the sun for 20 minutes Blast the spindles with some cold spray or pack them with ice while the hubs heat up, then try installing. |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 16th June 2024 - 10:34 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |