 Por 15 |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| partwerks |
 Sep 24 2014, 08:24 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,593 Joined: 7-September 06 From: Grand Island, NE Member No.: 6,787  |
What would be the best combo to use on the floor pans, once the floor tar is off? I have solid pans, so only anticipating surface rust.
http://www.amazon.com/POR-15-45008-Gloss-b...#productDetails For the center tunnel, or can/should the tunnel be taken off to remove the rust? http://detaildoctor.com/internal-frame-coa...-wspray-nozzle/ |
   |
 
|
  |
Replies
| dan_the _body_guy |
Sep 25 2014, 11:25 AM
Post
#2
|
|
Newbie Group: Members Posts: 28 Joined: 1-April 14 From: cleveland ohio Member No.: 17,185 Region Association: None |
the key to por15 is its supposed to be applied directly over any rust its intended as a rust converter, it has very little uv protection so it breaks down in sunlight and must be top coated with another paint or in your case carpet. its a good product if used as intended. you do not want to apply it to clean metal or it will just peel off as it needs the rust to bond it if you have clean bare metal you would want to epoxy the area and use something else as a topcoat
|
|
|
|
Posts in this topic
partwerks Por 15 Sep 24 2014, 08:24 PM
OllieG
What would be the best combo to use on the floor ... Sep 25 2014, 02:40 AM jacksun for the center tunnel I used a shop vac at one end... Sep 25 2014, 05:41 AM wndsnd It is holding up well with my restoration. I used... Sep 25 2014, 10:10 AM
SirAndy the key to por15 is its supposed to be applied dir... Sep 25 2014, 05:21 PM rjames
the key to por15 is its supposed to be applied di... Sep 25 2014, 11:15 PM barefoot I've had good luck with Loctite "Extend... Sep 25 2014, 04:07 PM partwerks Until the tar is off, I guess I won't ultimate... Sep 25 2014, 08:16 PM BeatNavy :agree: I've used it on four applications (tw... Sep 26 2014, 04:49 AM BeatNavy Just to give more detail on my experience:
1. Use... Sep 26 2014, 07:07 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 12th June 2024 - 09:57 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.