 Got a new to me Mid Rise Lift |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| quadracerx |
 Nov 8 2014, 04:43 PM
Post
#1
|
|
Member  Group: Members Posts: 428 Joined: 3-July 06 From: WA Member No.: 6,366 Region Association: Pacific Northwest  |
Hey Guys...
Got the V8 Conversion car back a couple weeks ago... now I got a new to me Mid Rise Lift... (IMG:style_emoticons/default/biggrin.gif) Like this one: http://www.napaonline.com/Catalog/CatalogI...LFBK_0117926436 So here is the question... Since our cars are so low, do I first need to roll it up on some 2X10s to add ground clearance? I know its a dumb question, but I don't have the lift until Monday. So, if I need some "ramps" so I can use it right away; I can get them beforehand.... Thanks for your help in advance... Steve |
   |
 
|
  |
Replies
| quadracerx |
Nov 8 2014, 06:04 PM
Post
#2
|
|
Member Group: Members Posts: 428 Joined: 3-July 06 From: WA Member No.: 6,366 Region Association: Pacific Northwest |
How long were the main boards you used?
How wide? That was just what I was looking for, I have a highly modified V8 car that at its lowest point is about 3.5 inches of ground clearance....Maybe slightly less... So I need to build this before I do anything... Thanks again... Steve |
|
|
|
Posts in this topic
quadracerx Got a new to me Mid Rise Lift Nov 8 2014, 04:43 PM
Harpo Most people simply put down 2x10 and then build a ... Nov 8 2014, 04:51 PM quadracerx Cutting a hole in the concrete is not possible... ... Nov 8 2014, 04:56 PM Cap'n Krusty I had a very similar lift we bought from Sanpper.
... Nov 8 2014, 05:10 PM Garold Shaffer I made ramps with a removable center so I could sw... Nov 8 2014, 05:16 PM
Cap'n Krusty
How long were the main boards you used?
How wide... Nov 8 2014, 07:16 PM r_towle
How long were the main boards you used?
How wid... Nov 9 2014, 11:20 PM rhodyguy are the ramp supports one piece of metal that wrap... Nov 8 2014, 06:11 PM BK911 Awesome purchase. Couldn't imagine life witho... Nov 9 2014, 07:16 AM jeeperjohn56 I had to use 2-2x10s 12ft long and stagger the top... Nov 9 2014, 06:52 PM quadracerx That was my plan too John...
Thanks...
Steve Nov 9 2014, 07:00 PM Highland
This is my setup. Stock car with Harbor Freight... Nov 11 2014, 04:59 PM quadracerx Hey Guys...
Ok, got the lift home and setup in th... Nov 11 2014, 06:09 PM siverson > I made ramps with a removable center
Interes... Oct 4 2015, 08:34 PM Garold Shaffer
> I made ramps with a removable center
Intere... Oct 4 2015, 08:48 PM GeorgeRud I used some 2x3 studs covered with 3/4" plywo... Oct 5 2015, 07:17 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 14th July 2025 - 03:25 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.