 removing old shock inserts from the front struts?, front shock removal |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| timmaria |
 Dec 8 2014, 10:29 PM
Post
#1
|
|
Newbie  Group: Members Posts: 14 Joined: 13-August 14 From: Fresno, Ca Member No.: 17,773 Region Association: Central California  |
I know I should have used a spanner wrench but I used an air hammer and cracked the jamb nut. But how do you pull the shock out of the spindle ?
 |
   |
 
|
  |
Replies
| Dave_Darling |
Dec 9 2014, 07:28 PM
Post
#2
|
|
914 Idiot Group: Members Posts: 15,161 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California 
|
Note that some 911 struts have inserts that are held in with roll pins. Those need to be tapped out before you can remove the insert from the strut.
It doesn't look like you have one of those, but just in case... --DD |
|
|
|
Posts in this topic
timmaria removing old shock inserts from the front struts? Dec 8 2014, 10:29 PM
malcolm2 It has been too long since I did it, but is that a... Dec 8 2014, 10:33 PM falcor75 It should just slide out, if it doesnt try bolting... Dec 8 2014, 11:34 PM
timmaria
It should just slide out, if it doesnt try boltin... Dec 8 2014, 11:52 PM Jeff Hail Turn it upside down and drain the fluid first....o... Dec 9 2014, 01:32 AM Steve Pratel If it is the original Boge/Sachs strut, there is a... Dec 9 2014, 05:55 AM ClayPerrine A recommendation..
When installing the new insert... Dec 9 2014, 06:15 AM CptTripps Sit on the ground...put the bottom between your fe... Dec 9 2014, 10:39 AM bdstone914 I have had several stick badly in the strut. I cl... Dec 9 2014, 02:53 PM 76-914 One other comment. Check to see if the strut is de... Dec 9 2014, 03:06 PM r_towle Turn upside down, over you head and pull it out wh... Dec 9 2014, 06:31 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th May 2025 - 11:30 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.