 How do I seperate the terminals from the plug |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Harpo |
 Dec 13 2014, 02:17 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,304 Joined: 21-August 11 From: Motor City aka Detroit Member No.: 13,469 Region Association: None  |
The terminals are loose in the housing but they will not come out. There has to be some kind of tool that will reach in to that special place
 |
   |
 
|
  |
Replies
| toolguy |
Dec 13 2014, 02:29 PM
Post
#2
|
|
Senior Member Group: Members Posts: 1,275 Joined: 2-April 11 From: San Diego / El Cajon Member No.: 12,889 Region Association: Southern California 
|
There is a little tab that bends up on the side of the copper connector. . It catches the lip inside the plastic housing. . There is a 'correct tool' to release them but a tiny jewelers screwdriver will work. .
Look inside and see where it is, insert the screwdriver and depress the tab until it passes the lip in the housing. . and pull out the copper connector. . If you have to force it, you don't have the tab depressed enough. . they come out easily. |
|
|
|
Posts in this topic
Harpo How do I seperate the terminals from the plug Dec 13 2014, 02:17 PM
dlee6204 There is a small tab on the terminal that holds th... Dec 13 2014, 02:26 PM Jeff Bowlsby Not all wire terminals have tangs, but for those t... Dec 13 2014, 02:29 PM bdstone914 On the flat side of the connector there is a tab t... Dec 13 2014, 02:41 PM Harpo This is what I love about 914world, there are alwa... Dec 13 2014, 02:44 PM The Cabinetmaker Nice pic Jeff. Kinda says it all. Dec 13 2014, 03:07 PM
toadman Years ago I purchased a tool just for this purpose... Dec 13 2014, 04:05 PM The Cabinetmaker
Years ago I purchased a tool just for this purpos... Dec 13 2014, 04:43 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 05:33 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.