 Valve adjustment, How the Fuchs with the HS in the way |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| DavidSweden |
 Jun 19 2015, 08:02 AM
Post
#1
|
|
Member  Group: Members Posts: 481 Joined: 8-June 14 From: Sweden Member No.: 17,452 Region Association: Scandinavia  |
Some of you may have read my earlier thread where I described the engine would not restart..
Well I checked out the wiring harnesses at the brain end and everything checked out. I have ordered a new CHT and have replaced the rotor and cap this is just to see if it gets it going as I have not found the problem Anyway I decided to check the valve clearance after reading the appropriate literature I hoisted the car only to be once again totally pissed by the design of this car. Question Is it possible to remove the valve covers and adjust the valves with the heat exchangers in place? I am starting to regret that I bought this car (IMG:style_emoticons/default/headbang.gif) moral support and possibly some therapy will be require (IMG:style_emoticons/default/blink.gif) |
   |
 
|
  |
Replies
| Bleyseng |
Jun 19 2015, 08:42 AM
Post
#2
|
|
Aircooled Baby! Group: Members Posts: 13,036 Joined: 27-December 02 From: Seattle, Washington (for now) Member No.: 24 Region Association: Pacific Northwest |
With the car on a lift it's pretty easy if you are laying on gravel it's real pain.
Use a big flat screwdriver and pop the wire retaining bales up or down and take em out of the hole in the head. Remove valve covers noting the VW logo should be upside down. Adjust valves Install new valve cover gaskets with a gasket sealant not RTV |
|
|
|
Posts in this topic
DavidSweden Valve adjustment Jun 19 2015, 08:02 AM
dabird
Some of you may have read my earlier thread where... Jun 19 2015, 08:22 AM type47
Is it possible to remove the valve covers and adj... Jun 19 2015, 08:49 AM somd914 And make sure innocent ears are within hearing dis... Jun 19 2015, 08:55 AM SLITS To pop the valve covers off, I thread a shop rag t... Jun 19 2015, 09:11 AM
Kansas 914
It isn't the easiest thing to do, but it is... Jun 19 2015, 09:30 AM SLITS
It isn't the easiest thing to do, but it i... Jun 19 2015, 11:01 AM Old Yella Hi
I did mine with the late exhaust, now that is a... Jun 19 2015, 09:26 AM brant It's really not that bad. Jun 19 2015, 09:35 AM scott_in_nh
It's really not that bad.
:agree:
I use ... Jun 19 2015, 11:07 AM r_towle
It's really not that bad.
:agree:
I use... Jun 19 2015, 09:13 PM Geezer914 Things could be worse. The more you do it the eas... Jun 19 2015, 10:28 AM Dave_Darling On 914s with the 70-74 style exhausts, access is a... Jun 19 2015, 10:33 AM dlestep in my driveway, which is slightly slanted, nose A... Jun 19 2015, 09:49 PM rhodyguy Ron's way with the cloth on the bale. It doesn... Jun 19 2015, 11:08 PM rjames I'd rather de with the exchangers being in the... Jun 20 2015, 01:01 AM Spoke Don't let your car get you down. These are 40+... Jun 20 2015, 05:35 AM TX914 The bent Tommy bar in the stock toolkit (for use w... Jun 20 2015, 06:09 AM Java2570 The first time I tried valve adjustment, it was fr... Jun 20 2015, 08:46 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 07:52 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.