 Oil Pressure Sending Hose Extension Kit |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| mhenderson57 |
 Jul 8 2015, 08:06 AM
Post
#1
|
|
Newbie  Group: Members Posts: 9 Joined: 25-March 12 From: Georgia Member No.: 14,303 Region Association: South East States  |
I'm looking for a braided stainless steel hose extension to install a oil pressure sending unit on my 2.0 liter engine. I would appreciate any advice on this purchase.
Thanks, Matt |
   |
 
|
  |
Replies
| Harpo |
Jul 8 2015, 04:13 PM
Post
#2
|
|
Senior Member Group: Members Posts: 1,304 Joined: 21-August 11 From: Motor City aka Detroit Member No.: 13,469 Region Association: None |
I purchased everything from JEgs this is an Earls pre assembled AN-4 line. The first time I installed the grease gun line I used a 7/16 crows foot tool. When I install this new line I will only need a socket to install the 1/8 to AN-4 adapter
 |
|
|
|
| dangerranger01 |
Jul 8 2015, 05:02 PM
Post
#3
|
|
Member Group: Members Posts: 145 Joined: 12-August 05 From: Boring, Oregon U.S.A. Member No.: 4,578 Region Association: None |
QUOTE(Harpo @ Jul 8 2015, 03:13 PM)  I purchased everything from JEgs this is an Earls pre assembled AN-4 line. The first time I installed the grease gun line I used a 7/16 crows foot tool. When I install this new line I will only need a socket to install the 1/8 to AN-4 adapter What is that aluminum colored block in the center for? And is the stock thread 1/8npt? Do you all run the gauge full time? |
|
|
|
Posts in this topic
mhenderson57 Oil Pressure Sending Hose Extension Kit Jul 8 2015, 08:06 AM
Racer Chris I have several on the shelf. Jul 8 2015, 08:11 AM stugray I used a 10mmX1.0 to npt adapter and a grease gun ... Jul 8 2015, 11:06 AM
DavidSweden
I used a 10mmX1.0 to npt adapter and a grease gun... Jul 8 2015, 11:14 AM stugray mine:
http://www.914world.com/bbs2/uploads_offsit... Jul 8 2015, 11:26 AM Mark Henry BTW if you use the grease gun hose you have to gro... Jul 8 2015, 12:30 PM Racer Chris IMO grease gun hoses don't last long in servic... Jul 8 2015, 01:12 PM pete000 The trick is how to install it with the engine in ... Jul 8 2015, 02:14 PM BeatNavy
The trick is how to install it with the engine in... Jul 8 2015, 04:23 PM pete000
I used a 7/16 crows foot tool.
Ah, I will give... Jul 8 2015, 04:23 PM Harpo The aluminum block is actually "C" chann... Jul 9 2015, 03:54 AM stugray If you use the adapter like in my pic above (brass... Jul 8 2015, 05:02 PM mr914 If you have a Parker store nearby
It's Parker... Jul 8 2015, 05:17 PM stugray
If you have a Parker store nearby
It's Parke... Jul 8 2015, 06:04 PM Mike Bellis The thread pitch (thread spacing really) is the sa... Jul 8 2015, 06:57 PM Jake Raby All you need is the hose from a paintball gun. Its... Jul 8 2015, 08:48 PM stugray From the other thread:
This is what I used ... P... Jul 8 2015, 08:57 PM Dtjaden :agree:
This is also what I am using. Jul 8 2015, 10:14 PM Valy This will set you up with the adapter from 10mm to... Jul 8 2015, 11:49 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 10:16 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.