Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> AMC heads or Rebuild, Whats the best route to take
catsltd
post Oct 14 2015, 08:34 PM
Post #1


Member
**

Group: Members
Posts: 181
Joined: 7-June 15
From: Calgary Alberta
Member No.: 18,814
Region Association: None



My tired 1.8L needs some work.
Car sat for 15 years,there is oil leaking out of every where.

Got to start somewhere Soooooooooooooo.

Should I order new AMC heads cost about $900:00 dollars.
OR
Should I pull my 100,000 mile heads and get them rebuilt.

Looking to save time as well as hassles of dealing with old rusted parts.


I have been working really hard on fixing the car.
But I have found as soon as you pull something apart,it leads to a never ending trail of more things that should be fixed as well.

I dont want to rebuild for 2 years,so thats what I am looking at.

Appreciate your advice and suggestions.
Thanks.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
Dave_Darling
post Oct 16 2015, 12:19 AM
Post #2


914 Idiot
**********

Group: Members
Posts: 14,991
Joined: 9-January 03
From: Silicon Valley / Kailua-Kona
Member No.: 121
Region Association: Northern California



Be aware that the hardware (valves, springs, guides, etc.) used on the AMC heads is not that good. Most people replace all of that before using them.

--DD
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mark Henry
post Oct 16 2015, 06:51 PM
Post #3


that's what I do!
***************

Group: Members
Posts: 20,065
Joined: 27-December 02
From: Port Hope, Ontario
Member No.: 26
Region Association: Canada



QUOTE(Dave_Darling @ Oct 16 2015, 02:19 AM) *

Be aware that the hardware (valves, springs, guides, etc.) used on the AMC heads is not that good. Most people replace all of that before using them.

--DD

That's the old original AMC heads, the quality is somewhat acceptable for a stocker now.
Performance engine well if it's me I'm going to replace all the stuff anyways, VW or AMC head.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 1st June 2024 - 07:21 AM