 Seat removal, How to |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 74ravenna |
 Nov 15 2015, 12:07 PM
Post
#1
|
|
Member  Group: Members Posts: 472 Joined: 19-October 14 From: nh Member No.: 18,032 Region Association: North East States 
 |
I hate to ask because it should be pretty straight forward and I've searched the site for an explanation but couldn't find one.
So, what is the process for seat removal? The bolts at the rear of the track are easy enough to access but what about the forward bolts? Or does the seat slide out of the tracks somehow? I just need to access the wiring and do a little cleaning (surface rust removal) of the floor. Thanks in advance. |
   |
 
|
  |
Replies
| Dave_Darling |
Nov 15 2015, 03:24 PM
Post
#2
|
|
914 Idiot Group: Members Posts: 15,196 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California
|
Sounds like you have a 74? If so, those are for the "door ajar" buzzer, and for the Dreaded Seatbelt Interlock Relay. The relay can AND SHOULD be disarmed by splicing the two fat yellow wires that run to it together. The relay itself can be discarded or reinstalled, whatever floats your boat, at that point.
--DD |
|
|
|
| 74ravenna |
Dec 13 2015, 10:55 AM
Post
#3
|
|
Member Group: Members Posts: 472 Joined: 19-October 14 From: nh Member No.: 18,032 Region Association: North East States
|
QUOTE(Dave_Darling @ Nov 15 2015, 04:24 PM)  Sounds like you have a 74? If so, those are for the "door ajar" buzzer, and for the Dreaded Seatbelt Interlock Relay. The relay can AND SHOULD be disarmed by splicing the two fat yellow wires that run to it together. The relay itself can be discarded or reinstalled, whatever floats your boat, at that point. --DD So do I understand this correctly? I splice the yellow/red stripe and yellow/white stripe together and tape off the rest of the wires? Thanks  |
|
|
|
Posts in this topic
74ravenna Seat removal Nov 15 2015, 12:07 PM
mepstein The seat slides off the track. I slide my finger u... Nov 15 2015, 12:16 PM Montreal914 Two ways:
What you described; 2 screws on each si... Nov 15 2015, 12:21 PM 74ravenna Yup, came right out.
Now, there were/are disconne... Nov 15 2015, 01:31 PM
396
[quote name='Dave_Darling' post='2265445' date='N... Dec 13 2015, 11:01 AM 74ravenna I do have a 74! I will take your advice and d... Nov 16 2015, 03:38 AM RobW Not a bad idea to clean the rails and add some lub... Nov 16 2015, 06:40 AM 74ravenna I am definitely cleaning and lubing the rails. The... Nov 16 2015, 08:29 AM orthobiz My take on it in an old thread with lots of (excru... Nov 16 2015, 09:26 PM Dave_Darling Yes. Splice the thick yellow/red wires together, ... Dec 13 2015, 01:54 PM 74ravenna
Yes. Splice the thick yellow/red wires together,... Dec 13 2015, 02:06 PM jbyron Ok, zombie thread time. I just pulled my driver se... Aug 10 2024, 11:42 AM Cairo94507 The seat slider adjuster should be adjacent to the... Aug 10 2024, 04:10 PM jbyron
The seat slider adjuster should be adjacent to th... Aug 10 2024, 08:11 PM doug_b_928 The silver brackets (one of which has the black ha... Aug 10 2024, 08:28 PM jbyron
The silver brackets (one of which has the black h... Aug 12 2024, 08:11 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 8th July 2025 - 09:54 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.