 Oil Catch Can Options |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| kupcar |
 Dec 16 2015, 10:28 AM
Post
#1
|
|
Member  Group: Members Posts: 95 Joined: 14-February 13 From: Chicago Member No.: 15,528 Region Association: None  |
My 914-6 conversion probably needs some sort of catch can. The previous owner has the crankcase vented to the oil tank. The vent from the tank simply has a sponge zip tied to the opening. It seems to work ok and I've never had a issue with anything but there has to be a better alternative. Something simple. Do most use a catch can, or can a small mesh filter be used? I cleaned a bit of oil residue off the motor when I was detailing the car. My guess is it came from venting into the engine compartment. Now that it looks pretty, I'd like to keep it that way. Any suggestions? Thanks.
|
   |
 
|
  |
Replies
| Bulldog9 |
Dec 19 2015, 12:10 PM
Post
#2
|
|
Senior Member Group: Members Posts: 706 Joined: 21-August 13 From: United States Member No.: 16,283 Region Association: MidAtlantic Region |
I've got one like this, looks and works great
http://www.americanmuscle.com/mishimoto-ca...e&GID=80263 |
|
|
|
Posts in this topic
kupcar Oil Catch Can Options Dec 16 2015, 10:28 AM
SirAndy I used an old Gatorade bottle with a few holes dri... Dec 16 2015, 12:26 PM stugray At the track I am often amazed how many can put th... Dec 16 2015, 01:13 PM Andyrew This is the one I am going to use.
Gonna fill it... Dec 16 2015, 01:17 PM
falcor75
This is the one I am going to use.
Gonna fill i... Dec 27 2015, 08:14 AM Andyrew
[quote name='Andyrew' post='2277838' date='Dec 16... Dec 27 2015, 12:57 PM boxsterfan What's the part# on that gatorade bottle? :D Dec 16 2015, 01:20 PM SirAndy What's the part# on that gatorade bottle? :D... Dec 16 2015, 01:40 PM Jeffs9146 Mine
:blink: :beer2: Dec 16 2015, 04:58 PM kupcar A+ for creativity across the board. Has anyone eve... Dec 16 2015, 05:18 PM SirAndy Has anyone ever puked up enough oil to catch anyth... Dec 16 2015, 05:44 PM Jeffs9146
A+ for creativity across the board. Has anyone ev... Dec 16 2015, 06:15 PM porschetub
A+ for creativity across the board. Has anyone ev... Dec 16 2015, 08:31 PM r_towle :) Andy is a redneck......hahahaha
Not something I... Dec 16 2015, 05:22 PM SirAndy :) Andy is a redneck......hahahaha
Not something I... Dec 16 2015, 05:45 PM patssle Running Gatorade here too. Andy was my inspiration... Dec 16 2015, 06:08 PM mb911 I made one for my last 6 .it was a piece of 2... Dec 16 2015, 06:26 PM The Cabinetmaker I had a carbed 4 for a while that used a small air... Dec 16 2015, 06:45 PM porschetub
I had a carbed 4 for a while that used a small ai... Dec 16 2015, 10:01 PM 11tenths If only the factory had put one under the battery ... Dec 16 2015, 08:01 PM Downunderman I vented the catch tank on my 6 back into the bott... Dec 17 2015, 12:42 AM stugray here's mine for a 4:
http://www.914world.com/... Dec 17 2015, 12:44 AM JmuRiz I plan on plugging mine into one of these:
http://... Dec 17 2015, 09:39 AM porschetub
I plan on plugging mine into one of these:
http:/... Dec 17 2015, 01:09 PM brant mine: Dec 17 2015, 03:12 PM Maltese Falcon I've had no luck with the K+N on our 2.0 type ... Dec 17 2015, 10:00 PM arkitect
I made one for my last 6 .it was a piece of 2... Dec 19 2015, 12:42 PM arkitect Sorry...double post.
Dave Dec 19 2015, 12:45 PM mb911
I made one for my last 6 .it was a piece of 2... Dec 19 2015, 02:49 PM arkitect
[quote name='arkitect' post='2279036' date='Dec 1... Dec 20 2015, 07:33 AM Andyrew Seriously guys this one is made of aluminum and wa... Dec 19 2015, 06:08 PM jmill
Seriously guys this one is made of aluminum and w... Dec 19 2015, 06:37 PM jmill Decent read if you're in the market for a catc... Dec 27 2015, 10:33 AM skier2.0 The small tube on the factory air filter housing g... Jan 1 2016, 09:10 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd April 2026 - 03:11 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.