 914/6 Engine Harness wiring question |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| puffinator |
 Feb 23 2016, 01:22 PM
Post
#1
|
|
Member  Group: Members Posts: 193 Joined: 6-August 13 From: Annapolis, MD Member No.: 16,218 Region Association: MidAtlantic Region  |
I have a 914/6 and I need some wiring help. The attached photo shows the engine compartment wiring harness (behind the engine) with a green wire that I do not know what it should attach to. I don’t have a wiring diagram. The photo is of the portion of the harness branching off from behind the engine to the alternator.
 |
   |
 
|
  |
Replies
| puffinator |
Feb 24 2016, 12:58 PM
Post
#2
|
|
Member Group: Members Posts: 193 Joined: 6-August 13 From: Annapolis, MD Member No.: 16,218 Region Association: MidAtlantic Region |
Where does the temperature sensor wiring go and what color is it? Does it go to the rear of the engine wiring bundle or the bundle in front of the engine?
|
|
|
|
| gereed75 |
Feb 24 2016, 02:55 PM
Post
#3
|
|
Senior Member Group: Members Posts: 1,249 Joined: 19-March 13 From: Pittsburgh PA Member No.: 15,674 Region Association: North East States 
|
QUOTE(puffinator @ Feb 24 2016, 01:58 PM)  Where does the temperature sensor wiring go and what color is it? Does it go to the rear of the engine wiring bundle or the bundle in front of the engine? Away from home right now so can not consult diagram but it is green and runs from the instrument bezel to the relay board connector. Can not recall which terminal number If you go behind the temp/ fuel gage you will find a loose solid green wire. That is it. It is in the main bundle coming out of the cabin. I do not believe that it went past the relay board into the engine harness but it might Sorry I do not have the diagram handy to confirm the terminal. Anybody else have theirs available to check ?? |
|
|
|
Posts in this topic
puffinator 914/6 Engine Harness wiring question Feb 23 2016, 01:22 PM
McMark Did you install the devil tape (electrical tape)? ... Feb 23 2016, 02:13 PM aturboman There was originally a wire that activated the dec... Feb 23 2016, 06:29 PM gandalf_025 The deceleration valve used 2 wires. A red and a... Feb 23 2016, 07:51 PM mskala I don't have any green in that area. Can... Feb 23 2016, 09:45 PM puffinator The bundle goes to the relay board, the starter, t... Feb 24 2016, 10:50 AM
gereed75
The bundle goes to the relay board, the starter, ... Feb 24 2016, 10:59 AM puffinator
Where does the temperature sensor wiring go and ... Feb 24 2016, 03:40 PM gereed75
[quote name='gereed75' post='2307387' date='Feb 2... Feb 24 2016, 04:11 PM puffinator What color wire is attached to your oil temperatur... Feb 24 2016, 04:57 PM gereed75
What color wire is attached to your oil temperatu... Feb 24 2016, 06:06 PM gereed75 [quote name='gereed75' date='Feb 24 20... Feb 24 2016, 06:57 PM gms #11 is Oil Temp, should be green with black stripe Feb 26 2016, 09:39 AM Festive_Zombie Question for you electrical gurus, I'm buildin... Mar 16 2016, 10:41 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 03:28 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.