914/6 Engine Harness wiring question |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
914/6 Engine Harness wiring question |
puffinator |
Feb 23 2016, 01:22 PM
Post
#1
|
Member Group: Members Posts: 193 Joined: 6-August 13 From: Annapolis, MD Member No.: 16,218 Region Association: MidAtlantic Region |
I have a 914/6 and I need some wiring help. The attached photo shows the engine compartment wiring harness (behind the engine) with a green wire that I do not know what it should attach to. I don’t have a wiring diagram. The photo is of the portion of the harness branching off from behind the engine to the alternator.
|
puffinator |
Feb 24 2016, 12:58 PM
Post
#2
|
Member Group: Members Posts: 193 Joined: 6-August 13 From: Annapolis, MD Member No.: 16,218 Region Association: MidAtlantic Region |
Where does the temperature sensor wiring go and what color is it? Does it go to the rear of the engine wiring bundle or the bundle in front of the engine?
|
gereed75 |
Feb 24 2016, 02:55 PM
Post
#3
|
Senior Member Group: Members Posts: 1,257 Joined: 19-March 13 From: Pittsburgh PA Member No.: 15,674 Region Association: North East States |
Where does the temperature sensor wiring go and what color is it? Does it go to the rear of the engine wiring bundle or the bundle in front of the engine? Away from home right now so can not consult diagram but it is green and runs from the instrument bezel to the relay board connector. Can not recall which terminal number If you go behind the temp/ fuel gage you will find a loose solid green wire. That is it. It is in the main bundle coming out of the cabin. I do not believe that it went past the relay board into the engine harness but it might Sorry I do not have the diagram handy to confirm the terminal. Anybody else have theirs available to check ?? |
puffinator |
Feb 24 2016, 03:40 PM
Post
#4
|
Member Group: Members Posts: 193 Joined: 6-August 13 From: Annapolis, MD Member No.: 16,218 Region Association: MidAtlantic Region |
Where does the temperature sensor wiring go and what color is it? Does it go to the rear of the engine wiring bundle or the bundle in front of the engine? Away from home right now so can not consult diagram but it is green and runs from the instrument bezel to the relay board connector. Can not recall which terminal number If you go behind the temp/ fuel gage you will find a loose solid green wire. That is it. It is in the main bundle coming out of the cabin. I do not believe that it went past the relay board into the engine harness but it might Sorry I do not have the diagram handy to confirm the terminal. Anybody else have theirs available to check ?? OK, that is the gauge end. How about the sensor end? |
Lo-Fi Version | Time is now: 6th June 2024 - 07:07 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |