Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Too much Light, Wires
forrestkhaag
post Apr 6 2016, 10:10 AM
Post #1


Senior Member
***

Group: Members
Posts: 935
Joined: 21-April 14
From: Scottsdale, Arizona
Member No.: 17,273
Region Association: Southwest Region



Has anyone experienced a condition where the headlights come on when the headlight switch is pulled one notch our for what should be parking lights only. New condition and I cannot seem to figure out why. Nothing new or weird under the fuse panel that I know of?

Jim suggested that it might be the relay on the back of the fuse panel?


Any thoughts or direction would be appreciated.

(IMG:style_emoticons/default/beerchug.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
forrestkhaag
post Apr 7 2016, 07:42 PM
Post #2


Senior Member
***

Group: Members
Posts: 935
Joined: 21-April 14
From: Scottsdale, Arizona
Member No.: 17,273
Region Association: Southwest Region



good tips both (or all three) / thanks for the insight / I got the headlight motors and all light functions front and back including fogs and rally lights up front to work / except for the high beams. I know the bulbs are good. I exchanged the switch with another switch and no change to lack of high beams......... \\ maybe a bad relay on the engine bay board / /??

So Mike.: Which relay is the high/low relay if I read your comment correctly? Thanks

and to 76-914: (IMG:style_emoticons/default/agree.gif) We are working on a change of salt air.... it takes time to find the right next move.

(IMG:style_emoticons/default/beerchug.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mike Bellis
post Apr 8 2016, 05:25 PM
Post #3


Resident Electrician
*****

Group: Members
Posts: 8,345
Joined: 22-June 09
From: Midlothian TX
Member No.: 10,496
Region Association: None



QUOTE(forrestkhaag @ Apr 7 2016, 06:42 PM) *

good tips both (or all three) / thanks for the insight / I got the headlight motors and all light functions front and back including fogs and rally lights up front to work / except for the high beams. I know the bulbs are good. I exchanged the switch with another switch and no change to lack of high beams......... \\ maybe a bad relay on the engine bay board / /??

So Mike.: Which relay is the high/low relay if I read your comment correctly? Thanks

and to 76-914: (IMG:style_emoticons/default/agree.gif) We are working on a change of salt air.... it takes time to find the right next move.

(IMG:style_emoticons/default/beerchug.gif)

Hi/lo relay is on the fuse panel. Red/white stripe wire, white wire, yellow wire and brown with stripe (white or yellow I've seen both types). Square usually silver in color. Red wire comes from headlight switch, yellow and white go to the headlight fuses. brown wire comes from the steering column.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 9th June 2024 - 09:20 AM