 Resealing the rear glass |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| JPA914 |
 Apr 10 2016, 07:59 PM
Post
#1
|
|
Member  Group: Members Posts: 81 Joined: 30-June 15 From: Houston, TX Member No.: 18,905 Region Association: Southwest Region  |
Just got done doing this. I used the 3/8" butyl from Napa that seems to be recommended most often (part# MS 4196). Has anybody else who has used this ended up with a gap between the glass and engine lid seal? I pressed the glass in as far as it would go, but I think maybe this butyl is too thick and prevents the glass from seating as far back as it should (IMG:style_emoticons/default/confused24.gif)
|
   |
 
|
  |
Replies
| Jett |
Apr 11 2016, 09:02 AM
Post
#2
|
|
Senior Member Group: Members Posts: 1,697 Joined: 27-July 14 From: Seattle Member No.: 17,686 Region Association: Pacific Northwest 
|
I used 3/8" and had to heat the tape to get the seal. I used a heat gun and kept pressing until it hit the seal.
|
|
|
|
Posts in this topic
JPA914 Resealing the rear glass Apr 10 2016, 07:59 PM
PancakePorsche I think 3/8 would be way too thick. thickness of s... Apr 10 2016, 09:52 PM dangrouche I have used 5/16" Apr 10 2016, 10:00 PM Valy I used 3/8. No issue. Apr 10 2016, 10:25 PM
JPA914
I used 3/8. No issue.
I'm glad it worked fo... Apr 11 2016, 08:56 AM JPA914
I used 3/8" and had to heat the tape to get ... Apr 11 2016, 09:41 AM tomrev You can also get a tube of the black poly sealant,... Apr 11 2016, 12:16 PM Mikey914 Pretty much covered in detail and I still stock th... Apr 11 2016, 12:43 PM JPA914
Pretty much covered in detail and I still stock t... Apr 11 2016, 01:27 PM SA-914 The battery was used in the original wired install... Apr 11 2016, 07:16 PM Mikey914 If you have heat issues. You may want to use the u... Apr 11 2016, 07:36 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd April 2026 - 08:15 AM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.