Rebuild of doors, How does one get all the door hardware correctly assembled |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Rebuild of doors, How does one get all the door hardware correctly assembled |
North Coast Jim |
May 26 2016, 03:24 PM
Post
#1
|
Member Group: Members Posts: 326 Joined: 11-December 15 From: Northern Ohio Member No.: 19,450 Region Association: MidAtlantic Region |
Spend the last day and a half attempting to assemble the passenger door with all new rubber. When I bought the car this aspect was in pieces so I didn't take it apart. Can't seem to find the correct procedure to enable all components to be correctly assembled. It's the aluminum channel at the top of the door, the one with a fuzzy inside and the window scraper on the top that is giving me an issue. Seems like I need to install the piece AFTER the glass is installed. When I attempt that there is no way I can get the glass down past to put in the 3 screws that hold it in place. Tried to assemble the channel first but a welded nut on the steel structure glued to the window bottom is too wide to fit the remaining opening. Being a Newbie I attempted to see if there was a thread that deals with this but found none. Please Help !! Off to have a beer now before I do something I'll regret. Car is 74 if that matters.
|
Mikey914 |
May 27 2016, 10:08 AM
Post
#2
|
The rubber man Group: Members Posts: 12,678 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
Here's the thread I did, and the factory diagrams for both early and late -
http://www.914world.com/bbs2/index.php?sho...=230572&hl= |
North Coast Jim |
May 28 2016, 05:00 AM
Post
#3
|
Member Group: Members Posts: 326 Joined: 11-December 15 From: Northern Ohio Member No.: 19,450 Region Association: MidAtlantic Region |
Here's the thread I did, and the factory diagrams for both early and late - http://www.914world.com/bbs2/index.php?sho...=230572&hl= Thanks for all the help Mikey my 914 Rubber equipped new door glass installation is now complete. I must add that I also rolled the car into the hot NW Ohio sun yesterday for the first time since last Nov. The sun's rays helped immensely to assemble all these components. Windows are now functional once again after 24 years !!!!! My fingers are a little sore today after that workout. |
Lo-Fi Version | Time is now: 10th June 2024 - 06:54 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |