Drivetrain drop in folding car... |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Drivetrain drop in folding car... |
Tbone425 |
May 31 2016, 07:54 PM
Post
#1
|
Newbie Group: Members Posts: 43 Joined: 15-August 15 From: AZ/WA Member No.: 19,065 Region Association: Southwest Region |
Looking for some advise on dropping eng/trans in a car that is soft in the middle. For obvious reasons I don't like the thought of having any part of me under it. Here is what I was thinking, I might lift the back, Jack stand and wood block every hard point. This would give me some safety...at least to some degree while I made all of the enderside disconnects.
Then I thought I would remove the rear wheels, slide a pallet under and then drop the car down over the pallet and remove the entire package including suspension and trailing arms. I figured that I could also cut it out from the top if needed, as the body is gone. Any thoughts or suggestions? Thanks folks! |
r_towle |
May 31 2016, 08:22 PM
Post
#2
|
Custom Member Group: Members Posts: 24,591 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States |
If the body is junk, cut both rear tranny bolts from behind with car on ground.
Cut front engine mounts and inner suspension mounts from above Cut out suspension mount from beside the car Remove upper shock bolt Lift car off motor Cut shifter rod of required Lift car, drag motor out from behind Been there done that |
Lo-Fi Version | Time is now: 9th June 2024 - 06:47 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |