 Stock Oil Pump Won't Fit, Any Ideas? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 914Sixer |
 Jun 12 2016, 05:36 PM
Post
#1
|
|
914 Guru  Group: Members Posts: 9,180 Joined: 17-January 05 From: San Angelo Texas Member No.: 3,457 Region Association: Southwest Region 
 |
I have the case buttoned up and torqued to spec for the 2056. The rotating assembly and the cam move like they should. I had a little trouble getting the oil pick up tube alignment but everything else is smooth. Next I dropped the drain sump cover and screen in. Moved on to put the taco plate and sender in. Up next was to install the oil pump, NOT happening (IMG:style_emoticons/default/headbang.gif) . So I look at everything and it looks ok, I don't see any to keep it from going in. I know it is a snug fit . I took the pump over to the wire wheel and evenly buffed around the pump housing 3 different times. Put some lube on the housing and the case, still no go. Case was line bored but it should not have made and difference in the oil pump area.
Keep buffing it down? |
   |
 
|
  |
Replies
| 914Sixer |
Jun 12 2016, 10:08 PM
Post
#2
|
|
914 Guru Group: Members Posts: 9,180 Joined: 17-January 05 From: San Angelo Texas Member No.: 3,457 Region Association: Southwest Region
|
This is not my 1st build. I have done about 15 engines. Pump is right side up and tang is lined up with camshaft. I will loosen up the case bolts tomorrow. I have never had to do that before.
|
|
|
|
| 914_teener |
Jun 12 2016, 10:13 PM
Post
#3
|
|
914 Guru Group: Members Posts: 5,266 Joined: 31-August 08 From: So. Cal Member No.: 9,489 Region Association: Southern California |
QUOTE(914Sixer @ Jun 12 2016, 09:08 PM)  This is not my 1st build. I have done about 15 engines. Pump is right side up and tang is lined up with camshaft. I will loosen up the case bolts tomorrow. I have never had to do that before. Cam thrust right? |
|
|
|
Posts in this topic
914Sixer Stock Oil Pump Won't Fit Jun 12 2016, 05:36 PM
jeffdon
I have the case buttoned up and torqued to spec f... Jun 12 2016, 06:44 PM McMark :agree: Jun 12 2016, 06:50 PM
r_towle It happens.
Did they mill the case halves?
Otherwi... Jun 12 2016, 11:11 PM r_towle And? Jun 18 2016, 06:45 PM
914Sixer Waiting on case spliter for oil pump. Should be h... Jun 19 2016, 05:56 AM wndsrfr
Waiting on case spliter for oil pump. Should be ... Jun 19 2016, 06:22 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st July 2025 - 07:21 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.