 Terrible Scraping Noise |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| TX914 |
 Jul 1 2016, 06:14 AM
Post
#1
|
|
Alan-B  Group: Members Posts: 177 Joined: 27-July 14 From: USA Member No.: 17,689 Region Association: None 
 |
Went for a short run around the neighborhood and stopped for gas. When I restarted there was a terrible scraping noise so I shut it off immediately. Sounded to me like a piece of engine tin or casing scraping on the impeller…
Tried restarting a couple of times with same result. Clutch in/out made no difference, and I was afraid to rev it. Oil level okay, and nothing loose in/around the impeller. I decided to drive it gently away to the side so I could tow it home for closer inspection. Restarted and drove in reverse for a few feet which made no difference, but then pulling forward for a few feet the scraping suddenly stopped. All seemed normal again so I drove it home – it idled fine, had good power and haven’t heard the noise since. I’m looking for ideas as to what the scraping sound might have been. Anyone experienced that before? It’s a ’76 with stock FI 2.0. It does have a relatively new starter. |
   |
 
|
Posts in this topic
ThePaintedMan Make sure there is nothing down by the impeller. D... Jul 1 2016, 06:17 AM
TX914 George, Thanks for the ideas. Flashlight and mirro... Jul 1 2016, 08:06 AM stugray "New Starter"?
Is it a stock starter or... Jul 1 2016, 06:31 AM TX914 Stugray, that's a stock starter (SR17x I think... Jul 1 2016, 08:12 AM The Cabinetmaker I experienced that exact same thing two weeks ago.... Jul 1 2016, 10:17 AM TX914 Thanks for the reply. Will definitely check that o... Jul 1 2016, 10:49 AM injunmort i experienced the same situation, make sure your e... Jul 1 2016, 05:51 PM TX914
i experienced the same situation, make sure your ... Jul 3 2016, 06:20 AM TX914 Finally got time to remove the starter to see if t... Aug 15 2016, 03:29 PM r_towle Maybe I'm getting old , well ok...I am. That s... Aug 15 2016, 06:10 PM The Cabinetmaker I'm old too, but starter looks right to me. Wh... Aug 15 2016, 06:23 PM Garland Fan belt frayed, slapped, and a peice flew off? Ch... Aug 15 2016, 07:54 PM porschetub what ever was causing the noise has spat out hopef... Aug 15 2016, 08:32 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th April 2026 - 07:52 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.