body work question rear valence, can I fix this? Progress with boring pics Options

[theleschyouknow]

I've had my car for about two years first year -what I call the year of living dangerously
I drove it whenever the weather allowed including a 914 weekend in the talimena hills
after a brokenclutch cable clevis it's been wheels in the air for close to a year I've been cleaning the engine and trans and suspension arms and cv's/axles and shocks & springs and engine tin I can reach of 40+ years of grease and dirt -a bunch of it likely from the leaking cv's which I'm sure I'll ask about soon in another thread
so here's my question for this thread:
my rear valence has one 'big' dent in it and couple small wrinkles in the bottom 1/4" or so 'return' flange that defines the bottom edge
pics following

having never done any kind of body work before this seems fairly straight forward to repair
what are the minimal tools required?
what kind of results could reasonably be expected?
could I (easily)screw it up beyond repair?

thanks for any comments or suggestions





(IMG:style_emoticons/default/beerchug.gif)
cjl

[zambezi]

Are you using a hammer and dolley or just the hammer and sand bag? For dents like these I don't use sand bags, but strictly hammer and dolley and have good results.